zins184

rear-loading horn: 12x28x16 = 2.33cu'ft 30hz thats pretty much all I remember bout the box

payment sent.. Icon sold

pm sent for icon..

Icon d1 or d2?

I had the same problem.. I placed sds thu out the the door, b roped the supports, put duct seal around door speakers, placed ccf in the doors. The mirror noise wasn't as bad but I could still hear it, I knew there wasn't anything I can do to the inside parts of it and that if I put foam or ccf Ill more then likely have mold forming. So I ended up putting silicone rubber sealant around the small gap or channel (where they come together) along the mirror housing/shell and now my mirrors are quiet.. hope that helps. edit: lol old thrend soory just noticed it

Wondering when the Icon 10's will be back in stock and possibly with the new dust cap??

What I meant is that the drop down doesnt display the options when I clicked on it

I dont know if it just me but I can't pick options on a 10" icon sure would be nice to have one with that sexy new dust cap lol

it was a reply to the OP which I didn't read anything about daily unless I missed it.

Check termpro forums and or check the link http://www.audiojunkies.com/blog/551/world...ingle-subwoofer

Not bad looking either!

I didn't see any 10" SI site so I'm guessing they don't make them..

really I wouldn't go with a raid setup but just one big HDD, 2Gb of ram and as for the lcd just go to a local store and find the one you like the best. I used the samsung lcd that was suggested has some response time issues but the Acer AL2216Wbd I suggested has it's pro and cons as well, I haven't seen any known issues. anyway both lcd are great either one is a good suggestion.

John the bash part wasn't directed towards you it was to let people know where I was coming from because seen it happen before anyway I just found your comment cocky in a way. So lets just forget about and give each other a hug . lol j/k well what I'm looking at between the toss up I had would be the Icon and to look into the SI but I think I would just go with the Icon.

You don't think two 10" ICON's (rated at 900wrms btw) can handle a 1500D? You're so wrong. I know someone running 3000w to a pair of 15" ICON's. Listen I didn't say they can't I said I don't think they can do to the fact they are rated at 900w rms and that I haven't heard anything about them until an rep suggested them to me. Now if they can handle 1500+ w for daily then that is great. I know that the Fi BL is rated at 1000wrms but I'm not sure if it can handle 1500+ w for daily. Now I'm looking for SQ and pair that would match up to my amp and I was told that the Icon had good SQ. thanks for your input and btw I'm not looking to get bashed here I'm looking for help.

Congrats on the new system and O/C. I just built one a few months back E6700 @ Stock, DFI LP NF680i LT SLI-T2R, OCZ Reaper 2048MB, 150 GB Raptor, WD 750Gb, Evga 8800 GTX, SB Audigy 2 ZS, 22" AL2216W, Logitech 5500Z. I as well play hellgate which is pretty good game I usually play FPS games btw we might run into each other on hellgate my SN is zins184 or zinsmeister

I wouldn't go over 2Gb of ram.. for xp 1 to 2 Gb is good enough over that is over kill. Are you looking for 750 total or an extra 750? now on each ide controller your able to connect two drives. on your system you should have 3 ide channels. btw don't forget to change the jumper settings on the HDD's first one is master the second is slave. I didn't see your question about the lcd's but my suggestion would be the Acer AL2216W it's nice lcd for the money also the memory your system uses is registered ecc so something like pc2700 with ecc, reg , and cas of at least 2.5. would work

Not trying to steal your thread it's just I'm looking at the same subs and I don't think it would be smart to start a new thread on the same subs. I have a saz-1500D and which one of the three would best match my amp? I'm only looking at a pair of 10" subs and really the toss up for me is Fi BL or the Icon. I don't think they can handle full amount of 1500w so I would have to run them at 2 Ohm for 800-900w.