Thumpper

couldn't leave this one plain wood...have an itch for something different

this one isn't bad....best one so far

I got an extra box...a set of 10" and a buddy with a chevy ext cab give me a day or two and I'll have an answer for that question

got test box #2 done...... 2.25cf3 tuned at 31hz

so like I had an hour long conversation with Mark a couple of weeks ago ...from what I heard the X-Con is going to be going into my install..... I got room for two 12" and a much bigger amp ..

the saw blade looks cool.......keep them coming..........

I need something that can be put on a Badge to Tag my enclosures.... so lets say a 2" by 6" space...give or take I can have it shrunk and blown up once I have the Logo so size doesn't have to be exact take in mind I have the use of an optic C and C so I need something that can be cut or engraved on ocassion I guess just post them up here...it'll make an intertesting thread

the way I look at it if I go to the local graphic designer I'll pay in the $100 + range for a logo that comes from one train of thought..... this way there is a variety of Idea's and I'll have a MUCH better selection to choose from I'm willing to give up some material and build time to do it right

I get the same treatment from Fedex....... I have had shippments dissapear for 2 weeks with no trace and they just show up one day out of the blue...frustrating as hell

I don't really have the room to store any more boxes so I'll let it go for $50 plus shipping started another one this morning that is 2.25cf3 and tuned at 31hz...

I am feeding my Icon 10's well over 1200w rms each with no problems...but I do have a clipp lite on my dash to ensure a clean signal....

the measurements are Height = 15" Depth = 27" Width = 35 3/4" 1.0cf3 per sub port tuned at 35hz with 10% port velocity I'll have to weigh it and get a shipping price....it will be a few $$$ because of the size but with the $75 price tag on the enclosure itself the over all price won't be to bad serious enquiries contact me direct at [email protected]

I am done playing with this enclosure.... this one is for sale...I will let it go for $75 plus shipping

with out the Horn the port tuning is at 35hz....1.0cf3 per sub

once again,that is a very nice looking box

the horn does have an effect on in car response...I am getting some unreal Termlab readings at stupid low frequencies with the box pushed right back ...if I slide the box ahead it peaks out 145 @ 32hz I like this design enough to throw some work into another test box....gonna try one tuned about 4hz lower

I think this design would work well with a single sub the only downside is that it takes up about 2x the room as a conventional enclosure and the face has to be un restricted to work properly it's friggin sick though...with low notes that strong I can blurr my vision with almost any song

it's a big assed box....takes up the WHOLE trunk I'm not done with this design yet...got a few tweeks to make that video wasn't showing the loudest frequencies either... I am keeping that under wrapps....got a score to settle against a few local guys first

did some Termlab testing this morning... here is a video http://www.youtube.com/watch?v=2N4J86yqRtY

here is my latest T212D4 enclosure build

this design was origionaly designed for a single woofer this is the first common chamber ...and so far I like it I'll try and get a better video camera for the next vids

there is not much SQ with a Sony Cyber-shot..the mics on them are junk here is another vid http://www.youtube.com/watch?v=ZO6ZP0Wr9es I had the Termlab on it this morning...it hit 126db at 10hz and climbed up to 141db at 32hz..... this was with a flat eq setting with the mic 12" from the passenger pillar and 3" off the dash....not bad at all from a trunk car with some more break in time the batteries fully charged and some adjustments I can squeek a bit more out....I'll re mic it in a week or so

took a small vid of these things.... I'll make another one after they break in a bit more

1.75cf3 plus all displacements tuned at 32hz