Thumpper

I beleive the older model does not have the 24 bit burr brown D/A's either....... could be mistaken though personally I would have them send a current model and ship the old one back

LOL.... you REALLY need a Pound That Sound enclosure

I'm going with SiX Icon 10" with the next enclosure

your system is only as good as the weakest link..... but there is no point in spending $100+ on a pair of RCA's unless the rest of the system is up to the same level............. you would be fine with a mid grade RCA , just make shure thay have good quality ends and are OFC copper

these will be available for people with PTS Enclosures... your gonna see alot of work done with this logo twisted to meet the install

Something I have wanted to do for a while now.....a Quad 15" Ground Pounder here is the equiptment list 1 1998 Ford Windstar ...white body with all dark tinted windows,grey interior with the 240hp V6...only 127,000 k on the drive train..very good shape 1 Premier 980BT head unit 2 pairs JBL 660gti components 2 JBL GTO 75.4ll amps for the components ( 290w rms x 4 ) 4 SSA Xcon 15" subs 1 JBL/Crown A3000gti amp for the subs ( rated at 3200w rms...YA OK WHAT EVER ...LOL ) all wiring will be Tsunami plus a bunch of other crap I'll work on it and add pics as I go.....

fiberglass acts as a mirror for sound waves

once I'm done with Marks Enclosure I'll be re doing the sub stage for the

this will be EPIC! it's a little something I drew up on the shop floor about 2 years ago.... lol

this enclosure is gonna be................................... we have room for two 12" or three 10" with this design

aww come on...RF has plastic and aluminum woofers why would best buy drop them

I had a few really expensive motors in some past rides and ran full synthetic oil I would change the filter at 3,000 miles and add 1 litre to make up for the loss with the filter change and change the oil every 6,000 ..never a problem..my last engine redlined at 8500rpm's and I drove the $hit out of it all the time one thing I noticed is that the aluminum bearings out lasted the tri metal..other than that it was all good

I'm excited about having the room and resourses to build the stuff I wanted to was un able to at my last location......

I have the two bays on the right side for starters....once I out grow them I'll take over the other side as well

the bassrace couch is gone........ I am almost ready to be taking new orders should be firing up the saws hopefully by the weekend

That was completely the opposite of what I experienced. Every pioneer i've ever had was noisy as all hell. Don't get me started on the Pico-Fuse problem... the only Pioneer head units I like have the 24 bitt burr brown d/a's...... the noise floor is pretty well non existant the lower line Pioneer's with out the burr browns are not even close take in mind I have 1600w rms pushing some of the best components money can buy ... I hear EVERYTHING and a sound floor can get really annoying with that much power the new stage 4 Pioneer has" four" 24 bit D/A's and a 31 band eq.............seperate volume rails for each channel and an internal 4 way x-over...nothing else like it on the market limited edition unit and is only distributed to a small amount of dealers in very small quantity (I have mine reserved already)

I would just shrink the width of the port..you may increase port noise slightly but it will be cheeper than building a new enclosure you could add more port length but it will mess with the interior volume

you do amazing things with computers

it's gonna be 100x better than the old single bay garage I worked out of in the past I now have the room and resources to build much more complicated stuff

Awsome Work Mark!!! one of these days I'm gonna have to get you to work on my website.......

I'm still working on setting up the new shop location...will post when I am ready to except new orders......

I am still in the process of setting up the new shop location.... I will post when I am ready to start taking orders

I have done things with the Icon 10" that just isn't right....for example 143.6db @ 10hz with four 10" by far one of the best sounding woofers on the market...you would only be impressed

this is good news for my new shop!!!!!!

The Icon 10" is one of my favorite woofers.... gawwd dayummmm do they drop..... Lol there in you PTS you sent me!! WOOT. Thanks MARK Hatchie is up and running just waiting on insurance.. that enclosure moves alot of air doesn't it...LOL