soundemon

I sure did. some time ago. I hate to be a pest and I know they're busy, but its been weeks...

Mine is for sure rubbing now, stopped last night and started again today... I free aired it and it went away, I don't know what the fudge is going on. Can this be fixed without a recone? Sorry for the noob questions, I have never had this issue before.. Whats "free aired it" mean? just removed from its enclosure? Mine hasnt been in an enclosure yet (since it's been in my posession) and just driven with test tones to test.

I've put a flashlight to the spider and looked thru, and pushed the cone up so I can see the top of the coils and the former. I've then turned the sub and looked at it from every possible angle turning the sub around a full 360 degrees and I can see no rubbing, no interferance, and nothing that looks loose. I'm running with one coil shorted and power to the other set, for a 4ohm load. I'm using the LFE signal from my HT reciever and clean power from a crown K1 Pro amp.

Still waiting... Can you PM me or Email to [email protected]?

Also from Canada! (Toronto)

2 days shipping? awsome. I'm also in Ontario and usually we end up waiting alot longer than that...

Have a look at some of the integrated amps by NAD. C370 is one, (but a tiny bit out of your price range) big power, most with pre-outs for running a sub. Stay away from a 5.1 reciever if you only intend to run 2.1. you're spending your money on processing rather than amplification.

The HSU VTF mk2 sells for a decent price on the used market, and is said to be a great sub...

Nice! Alot of classic audio gear in there!

Looking good! IB setups are some of the cleanest bass you'll ever hear!

Still waiting... Can you PM me or Email to [email protected]?

Thanks for your reply Scott. I've PM'd but your inbox is full - you are a busy guy! I will take a couple of these recone kits. PM me when you have the chance. Thanks again!

Nice setup! What you need to do now is sell both of those to me and try and beat those numbers with something new...

I try to be patient... Sent them an Email first thing monday morning and haven't heard back, so I guess it's only been 4 days. Thanks for your replies Vladd

Well as soon as the "contact us" link actually works they'll be getting a message from me... Also, anyone have a link to the site? I've just googled it and the main site doesnt come up anymore.

Do you have any contact info? I've sent an enquiry to the "general" Email address, ut they seem to be slow to respond to these... Thanks!

Hi All The ava15 I'm having problems with isn't co-operating, so it looks like the next step is to take it apart and see whats going on inside, whats making that clicking / tapping sound. In order to do this, I think I'll need to buy a recone kit. http://www.soundsolutionsaudio.com/forum/i...showtopic=13630 Anyone out there know where I could get my hands on one? I'm desperate here... Thanks!

Well I've blown the driver out thoroughly using compressed air, and the sound persists. It looks like my next step is to take the driver apart, but I'll need to find a recone kit before I'll take this step. I've started another thread looking for one http://www.soundsolutionsaudio.com/forum/i...showtopic=13891 If anyone can help I'd be greatly appreciative!!!

As stated by someone else, I didn't design it. I am, however, absolutely sick and tired of traditional ported boxes and their lame frequency response. People always say something like "just put it in blah cubes, and tune it to blah hz for a nice smooth response".... well, that IS NOT the case most of the time. Although ported boxes do get quite loud, and sound "ok" sometimes... they do not at all turn out like people say they will just because they plotted them in some crappy box graphing program that only plots the graphs in an infinite environment, and not in a small cabin like a CAR, and can't possibly factor in all the different wavelength phases, and different shapes/obstacles in the way. Also, people are just too ignorant to the fact that there are other types of enclosures out there other than ported and sealed, and those other types of enclosures DO WORK if designed correctly. I love transmission line enclosures. All of my HT speakers are PMC, who are famous for their TL enclosure designs. I'm still in the "decision making" process regarding building enclusures for my Avalanche 15's, (for HT)and had pretty much settled on sealed or simple ported. if theres anywhere to get info on a TL design for Ascendant subwoofers tho, maybe I'll think again!

That is a really fantastic looking enclosure. How did you calculate the parameters ie: lenth / width / height of the lines of the TL? This is a bold move on your part, TL enclosures are alot more difficult to design and build than a simple sealed or ported enclosure! Looking forward to hearing your impressions on the sound.

I've sat and pushed the cone up by hand enough to see a good portion of the coils. I carefully pushed the cone up and then turned the sub by 10 or 15 degrees so I could see the assembly from as many angles as possible, and there didn't seem to be any interferance or rubbing between the coils and the magnet. is this what you mean, or is there something else I can look for?

I was away for a few days but I'll be getting a can today. I'm very hopefull on this one!

What makes you say that? what kind of damage? Anything can be fixed. be more specific please. Are the spider and surround attached on all sides? Everything seems to be glued down and not flapping.

What makes you say that? what kind of damage? Anything can be fixed. be more specific please.

We're thinking along the same lines: the guy put them in a huge box with a ton of peanuts. some had gotten up inside the magnet. I cleared all those out when it first arrived. (no easy task) So where else could one be stuck? I've put a small mirror inside the magnet and could see nothing. I've also pushed the cone up and can see the coils, and have looked from all angles, but can see nothing.