ABXX49

This is more of what I was asking about. Conversing in the IHOP is great, but clicking the post button as many times as possible I just don't get. I finished my whole install without posting once. There is enough information floating around that there shouldn't be half the dumb questions that there are. I've been trolling 3 different forums for a couple months now learning how to fiberglass. I've only posted once, but for the most part, ALL of the information is there. I seriously think there should be a "meeting" to discuss a little lengthier new member process. Even appoint a small committee to take care of new member activation and registration.

Updated: :bigclap:

speaking of fail.... would you like to try that again ? I'm going to hope that he read it as 1 speaker (somehow). If not, before you speak, think!

I think the HOP needs to update the spam rules.

I would do a nice upfront battery, the big three, and a big battery in the back (maybe two). I would do the alternator last.

Any dust cap that will fit would work. All you need is tape and some epoxy to fix it.

When you make your initial cuts out of the sheet, do you use a table saw or a circular saw?

*Snaps fingers.* Come one, Shizzz

On the top of the forum there is a button that says "SSA SHOP"

Yeah definitely figured that out......I'm planning to building a better, cleaner, more precise box this summer so that should turn out way better because of all I've learned so far. I learn something new every time I build. Just keep practicing!

What type of coil are you looking for? You may be able to get one custom built for a price.

LOL seriously, what song is that?!

What amp?!

Do you have any other product to compare it to?

That's normal. Technically I can't tell as I don't know EXACTLY why. Someone here will chime in though that can give you the technicals.

When you measure the distance of a aero port that is curved, do you take the inner side, the outer side, or an imaginary line in the middle?

Sorry to hear that. What does he have? A fever and an attitude. That second one there is a tough one to cure.

That would be a 2 ohm voice coil. If there are two set's of terminals, then it would be a dual 2 ohm speaker.

If it puts out that many watts, it would be a good choice for a pair of SSD's. I'm not familiar with it though.

What happened here?! I didn't start this topic!

Sorry to hear that. What does he have?

Shame. Also, feels like I was watching the Blair Witch Project!

Well, I'm just going to return all the cut wood and get two fresh sheets. Guess I'll just stick to cutting it myself. I just have a hard time cutting with the saw I have by myself. Just have to wait for a weekend when my box building buddy comes home! Also, Sean, I'm taking a compass out to school today and will get those rings made out. First thing when it's nice out I'll get some pictures.

So I went to Lowe's yesterday to buy 2 sheets of MDF. I had previously bought some there and had them cut to size (for my HT sub) and it worked out great. So I go up yesterday and have this guy cut all the sheets into what I needed them to fit in my family van. He gets everything cut and I head home, and then over to my buddies farm to help him work a bit there. Well just a few minutes ago I unpack the van and go down stairs to start cutting them down to length as they were supposedly cut to width already. I have this big pile of MDF down there so I'm measuring through to see which ones I need. Come to find out that EVERY SINGLE PIECE that they cut for me is wrong. He did say it may not be completely, perfectly square, but nothing about it cutting WAY off. They range from 1/4" off to 1.5" off?! So I call Lowes and talk to the manager who freaks out on me about "it's not meant to cut accurately!!!!11!" Well it sure did last time. So now I need to get a hold of my buddy, get the receipt, carry a million cuts of MDF to my car, take it back and figure out how to get 2 full sheets of MDF home now. Sigh.

Every review or article I have read on the 2010's say they addressed any and all complaints with the 2008, especially handling and interior. it looked much btter in person at the car show than in the pics I have seen. I couldn't look inside well really I was massively impressed with the new taurus. It looks GREAT compaired to most cars in that scale and range of cost. Rumor has it they are bringing back the SHO with a twin turbo, too!