blue86f150

Got the wood cut and vinyl it. Getting closer and closer everyday This is how it sits now. Time to work on the back side. Need it done before Saturday for the MECA show in Bakersfield.

Change of plans on the sealing part. Instead of doing 3 seperate pieces, going to do 1 solid piece with a sunken cut out for the subs and ports. Here is the progress so far and the back side I also started painting the part of the box where the port ends are blue to match the color of the car

Ports are here. Getting closer and Closer.

Like I said earlier the section to the right on the wood is to hold the battery Battery in place. absolutely no wiggle room. Snug as a bug Here it is mocked up

cardboard Cut out onto wood. Now to get some foam and vinyl and wrap them up How far away from the seat the box sits. About 2"

as long as its an agm (including your 14 volt xs power) its fine to be on it side. The only thing they recommend is that they dont me upside down, aka terminals facing the earth. Its slowly but surely getting there. The space on the drivers side where the extra wood is, is where the battery is going to go. I already have the frame in place, just don't thing that its necessary to post the picture quite yet. I have to work the day shift tomorrow so no updates till Saturday.

Trying to get the word out. If you are planning to come down to the Forbidden Fantasy Car show in Lake Perris here are a few things you need to know. 1.) Hotels that are car show friendly are listed on www.forbiddenfantasyshow.com. I called the 3 he has listed and found out The Best Western (951) 924-4546) will charge $74.99 + tax a night and require a $100 deposit. Holiday Inn (951) 243-0075)is $85.00 + tax a night without a deposit. Tell them you are there for the Forbidden Fantasy Car Show. 2.) The show date is March 12-13 with the dB drag part on the 13. Instead of the $20 enterance fee it will be $5 for all dB Drag competitors. They want you there between 8am and 9am. He hasn't decided if they will let you in after 9am or not. Looks like it will be a 2X show the first of the year. Last year, they let very few people in after 9, so be aware.

Just got word on this Shot Callers 1377 Lillac St Bloomington, CA 92316 USA Official Db Drag and Bass Race Event. Lets go so cal. Lets get the season started.

Starting to get everything laid out so far all i got right now

Trying to get everything laid out properly One of my collection of blown subs lol. Used it and the gasket as a template for the future ones And got the subs holes cut out. Just place my order on the areo ports. Hopefully they will be in by Tuesday next week. Everything is going smoothly so far

using birch for the lightness of it Finally sacked up and got me a nail gun. Not the most expensive one in the world, but it gets the job done. I still cant believe its taken me this long to get one. Makes life sooo much easier. Guess I forgot to take pics of all the pieces cut. Here it is starting to take shape After this was taken I brought the box inside, set the top on it and put 3 big batteries to act as a clamp.

Last system consisted of a sundown audio 3k on 2 re Sex 10's and a sundown 125.2 on the factory door speakers. Plan is to get a sundown 50.4, alpine H701(to be run with an alpine w200) and some hertz 3 way components. Going from 10's to 12's and a forward firing box sealed off. Here is a video of the previous system Box was tuned to 30hz. Well here is the tear down and rebuild process Bye Bye Blew 1 10 last week and put a cover over the hole so I could still have some tunes for the time being.

Your alt should be fine if it is only going to be for 2-3 sec burps, thats not enough time to even drain the batteries. you should be fine electrical wise. I know the BTL is a beast, but i would be carefull at putting 5200 watts to it, just be conservative with the bass knob, and the settings on the amp, and you should be fine.

You can run multiple alternators to the same batt with out any issues. If you are gonna be running dual alts, i would do the Big 3 all in 1/0, since it seems like you are gonna be pulling a lot of juice

What kind of sub, and vehicle is it goin to. You say orange county, and it say HB as in Huntington Beach? If so, i might be able to do it as long as you get me all the stuff that is needed for it (wood, box plans, screws, etc.) I live near the LA county fair, so your not too far from here, plus im in whittier all the time. PM if you want