Incriminator

The new site is going live in minutes - we are still working to add all the new drivers and content as needed. Please report anything that needs attention or if the site has an error. Thanks, Nick http://www.incriminatoraudio.com

Nice!

Looks awesome - keep us posted!

DR 12" - Filling the gap from the LI to DP 1000 RMS!

Word. And is the LI efficient (i.e. 400 watts on the 15 ported tuned low in a Cougar enough for a clean daily driver)? Thanks, Kef I have the simulated, but not the measured yet. Will soon. Anything down to 300-350 RMS will rock an LI! Thanks, Nick

Available Monday! 600 RMS and ready to roll!

We are releasing: LI 12 and 15 - D1 or D2 - 600 RMS FL 12 and 15 - D2 only for now - 600-750 RMS DR 12, 15, and 18 - D1 or D1 - 1000 RMS DP 18 - D1 or D2 - 1500 RMS Coming next week - April 3rd! Thanks, Nick

Black Nickel finish - Standard 12's and 15's.

x2 BOTH!

Yep!!! So Hick is fussing about pics already! Which he always does when I'm not prepared to show anything. So I grabbed some parts and took some pics to give you an idea and to shut him up.

Since the release is today! Expect some pictures today or tomorrow. Thanks, Nick

Since we are getting close to the release of alot of new products, I've been getting alot of emails about pricing, so I'm going to post MSRP to give you guys an idea on the direct price point! As you know, no one pays retail on the internet! MSRP: 600 RMS LI 12 - $259.99 LI 15 - $279.99 600-750 RMS FL 12 - TBA FL 15 - TBA 1000 RMS DR 12 - $429.99 DR 15 - $469.99 DR 18 - $529.99 1500 RMS DP 12 - $599.99 DP 15 - $639.99 DP 18 - $689.99 (It's almost here!) Thanks, Nick

If SS can't do it, I can take care of it for you. Thanks, Nick

Here is the chart! Woofer: Sealed: Ported: Port Area: Average: DP 12 Not Recommend 1.75-3.00 cuft 20-48 inches 2.5 cuft / 35 inches / 28-40 Hz DP 15 Not Recommend 3.00-5.00 cuft 36-80 inches 4.0 cuft / 55 inches / 28-40 Hz DP 18 Not Recommend 5.00-7.50 cuft 60-120 inches 6.5 cuft / 90 inches / 28-40 Hz DP 21 Not Recommend 7.50-10.00 cuft 90-160 inches 8.5 cuft / 120 inches / 28-40 Hz Thanks, Nick

Flatline its an SQ Underhung driver. Warden is still in the works! Thanks, Nick

How much room do you have? Thanks, Nick

Pound for Pound - Powermaster is the way!

In some testing we've done here they have been able to take 7kw of so for burps. After that I'm not sure, we haven't had a chance to try anything over that yet. Thanks, Nick

It's roughly the same power. I think either way will work well, you will have to wire the the 40.1 higher than the 20.1's, plus a 40.1 is less space.

ok thanks guys!! Agreed!

Correct, that is suggested retail for stores!

Ditto! We usually say 1.75 to 3 cubes ported with 20-48 inches of port... Average is 2.5 cuft / 35 inches / 28-40 Hz Thanks, Nick

We recommend 400 amps, put a 200 amp fuse or breaker on each 1/0 input. Thanks, Nick

1. You plug into the Master amp with your RCA's from the headunit. 2. Come out of the single RCA from Master to the Slave unit, flips the swtiches on each unit. 3. Connect the negitive speakers lead from each amp together. 4. Use the positive from the master as postive lead, use postive from slave as negitive. 5. Wang hard! P.S You can only connect 2 40.1's or 2 20.1's together, you can't mix and match them. Thanks, Nick

Brandon, I just replied to you again about 10 minutes ago, I guess my first email didn't make it. Thanks, Nick