mazzasec

Would this be the proper way to hook up an extra battery? And will the power still be sufficient with the distroblock option 1 option 2

ICONS! I love mine and they sure do slam hard

what frequencies sound louder to the ear?

well its just now starting lol

new pics!

I have only had one setup in the past and this DOES blow them away by alot. I had people coming up to me saying " damn what do you got in there that chit sound good" so i told them some ICONS even though i couldnt get into depth to where to get them cause they were just driving by as i was driving. And thanks for my page!

new pics!

off topic but those 06 oz rally's are NICE!

Well I got a design for the box I want and I am having a shop build it today. This is it. 17"H x 42"W x 24"D, 8.174^3ft gross vol. Slot port, 15.5" x 5" x 15.92"Long@37Hz. After all displacement, 7.048^3ft net What do I need to change the port to too get a tuning of 35hz?

In my diagram are they being hooked up parrarlell? Cause I just read that you need 2 of the same model and age to hook them up. Or will it do fine hooked up to my stock battery?

2 15" SSA ICONS! I was pretty pissed this morning cause someone rung the doorbell at like 8 30 am i was like " who the hell is ringing the doorbell" then i found out it was just UPS! vs a JL 10"

I got a soundstream pca2000d does 2000 watts at 1ohm and 1500 at 2ohm. I got dual 2ohms so they will be getting about 750 each. box lets just say a BIG ported box

so if i wire it like this diagram i should be pretty safe?

those subs are damn heavy i cant wait to get my hooked up! they been sittin in my room for about a week!

I got 1/0 gauge of kicker hyperflex going through my car. And for this fused distroblock i wont have to fuse the short run of 1/0 gauge coming off the battery into this fuse? <a href="http://cgi.ebay.com/DUAL-PLATINUM-ANL-DISTRIBUTION-BLOCK-CQ-3222-FREE-FUSE_W0QQitemZ300195285190QQihZ020QQcateg oryZ50551QQssPageNameZWDVWQQrdZ1QQcmdZViewItem" target="_blank">http://cgi.ebay.com/DUAL-PLATINUM-ANL-DIST...1QQcmdZViewItem</a> this is whati got

i dont have any runs of 1/0 gauge left cause i got all my wiring done. Cant i just ground the 2 amps and the second battery to the same location on the chassis? so this is the fuse holder i need for the 4 gauge right? http://cgi.ebay.com/DUAL-PLATINUM-LED-ANL-...1QQcmdZViewItem or could i run 0 gauge off the second batt into this distroblock and then do the 2 runs of 4 gauge out? http://cgi.ebay.com/DUAL-PLATINUM-ANL-DIST...1QQcmdZViewItem will that run of 1/0 gauge coming off the batt need to be fused?

So i need to fuse the 1/0 gauge right before the second batt with a 300 a fuse. Then i need to fuse the 4 gauge going to the 2000 watt amp with a 300a fuse and then fuse the 4 gauge going to the JL amp (75 x4 at 4ohms) with like a 100a fuse?

I just found this on ebay http://cgi.ebay.com/AGU-Fused-Distribution...1QQcmdZViewItem would that be a good fused distro to use? and if i get thats all i will need fused coming OFF the battery right?

OK 2 questions. I got the kicker distro block so theres no fuse in there. and second i am just grounding everything to the chassis im not using a ground distroblock I would use that unfused distro block for the grounds, and buy a fused distro block for the power. Grounding back to the battery is more efficient than grounding to the chassis. Well a user posted this before "When grounding amps, never ground to the battery. Ground each amp SEPARATELY. Grounding more than 1 amp to the same contact point can cause undesirable results" so if you use the distroblock the ground is coming from the battery So wouldnt it just be better to ground them seperatley?

OK 2 questions. I got the kicker distro block so theres no fuse in there. and second i am just grounding everything to the chassis im not using a ground distroblock

alright option 1 or 2

alright let me make a new diagram

Alright well right now i got a pca2000d that does 2000 watts at 1ohm and then a jl e6450 that im powering my boston acoustics components that are getting 75 watts at 4ohm upfront and infinity kappa coaxials in the back get 90 watts at 2 ohm. I will be putting the battery under my back seat from the battery positive to the soundstream amp it will probably require about 2-3 feet to the soundstream amp and about 3-4 feet to the jl amp. I might just ditch the distros and just wire everything from the battery

Both my amps wont really accept anything larger then 4 gauge. Or else I would put 1/0 gauge in there. Also i was told that i might need to fuse each 4 gauge after the distro block since my amps dont have fuses