cman0655555

has this sold? Yes this is universal. It can be reconed to a d2 or whatever config you want and prefer. It is still available as well. Sorry I thought I replied about this days ago from my phone.

PM sent about the info.

Found out some bad news with my job need this gone by this weekend if possible make some offers!

1. Product: 12’’ FI Q Dual 1 2. Specs: http://store.ficaraudio.com/q12/ Dual 1 ohm Cast basket Wrap around gasket Kraft pulp fiber reinforced cone Single layer wide foam surround Push terminals Extra heavy lead wire FEA optimized motor 3" diameter 4 layer coil Single high grade magnet Quad progressive spiders High or low Qts motors Optional Heli-cool system And many other custom options Q12 DUAL 1 Fs: 34.2 Hz | 33.9 Hz Re: 0.7 Ohms/coil | 1.4 Ohms/coil Qms: 7.63 | 7.69 Qes: .39 | .39 Qts: .37 | .37 Mms: 249g | 253g Cms: 0.87mm/N | 0.87mm/N Sd: 481cm^2 | 481cm^2 Vas: 28.3 l | 28.3 l Spl: 86.5dB 1W/1m | 86.3dB 1W/1m Bl: 13.9 N/A | 19.65 N/A Xmax: 28mm Rms: 1500W Sealed box: .8-1.5 High QTScuft Ported box: 1.8-2.5 cuft @ 28-33Hz Sub OD: 12.500” Cut ID: 11.125” Mounting depth: 7.000” Displacement: 0.16cuft 3. Description/Condition: Fresh Recone. Great condition 8/10 cosmetic 10/10 function. Great sub planned on using myself but never did. Sitting around so it needs to go. Has 2 very small scuffs on the surround and typical scratches on the motor. 4. Price: NO TRADES! $200 shipped anywhere in the continental US. If you’re local we can meet up or I will drive to you for a small fee. 5. Pics

BUMP pictures back up. Make offers need this thing moved.

Pictures back up. Make offers.

BUMP!

BUMP!

1. Product: 12’’ Basket 2. Specs: 12" 12 Spoke Basket 8’’ spider landing Push terminals 3. Description/Condition : Need to be cleaned off but other than that are 100% functional and ready to use. 4. Price: 25+actual shipping obo. Not looking for trades but doesn’t hurt to post them. Possibly interested in a decent set of 6.5’s for my rear deck. 5. Pictures:

1. Product: Powerbass XS Motor 2. Specs: 3’’ Coil Recone info - coils pole od 2.93 top plate id 3.22 Got a quote on a recone from fixmyspeaker for 1000rms and it was right at $100. Sub Specs: Power Handling (Rms / Peak):800 / 1600 watts Frequency: 25Hz - 500Hz Nominal Impedance: 2+ 2ohm Sensitivity (1W / 1M): 90.1 dB Fs: 31.5Hz / Vas (Liters): 36.96 Qts: .33Sensitivity 88.4dB 3. Description/Condition : Motor is in good condition no chips just normal wear. Functions 100% just needs a recone. 4. Price: 75 shipped anywhere in the continental US. Not looking for trades but doesn’t hurt to post them. Possibly interested in a decent set of 6.5’s for my rear deck. 5. Pictures:

Its just the way of the show they cant have everyone just demoing all day. Sure that would be nice but trust me it gets really annoying when you are at a show for hours upon end and you hear the same persons crappy system 100 times. There was actually demoing that was able to be done Saturday night when everyone completed their runs. In fact my teammate josh newton demoed his van for a good 30+ minutes. You just had to pull into the lane to do it. Sure it wasn't the greatest but it was better than nothing at all. For anyone that missed the show here are some park and pound videos that were taken. http://www.youtube.com/user/thefordmccord

Not much longer!

Ill be there Saturday and Sunday, not sure if im competing or not yet though, if so I will be in Park and Pound 1.

Yea I would choose an ext cab s10 if you plan on doing MECA and metering at the headrest. They seem to be the best vehicles and definitely pretty easy to get loud.

Cool man I will try and stop and say hi sometime. That sucks it always works out that there is another org. with finals the same weekend.