BILTD

Woop!

BP power too.. Should make for a neat bunch of subs.

Guys, sorry for the delay your order is being processed. I will have all the info to Manish later today. Thanks!

Forgot to add this update of the volume reductions... I couldn't get in there so had to rely on the help of my 2ft cousin to carry out the work, thanks! 15 cubes or there abouts was soaked up inside the enclosure in an effort to raise tuning. As a result I'm no longer breaking screens. But thats just started a whole list of other things breaking, Both door mirrors Passanger side window Brake fluid reservoir bottle, gushing fluid everywhere Washer fluid bottle, cracked and hanging Wiper motor mechnism bust off the metal work Hood no longer opens without being thumped I'm sure more things will break but there you go.

With the old 88 cube enclosure roughly with a 28Hz tuning. I never got the max SPL with the old box the low note caused several screens to blow out. I suspect it would have been couple more tenths. I'll never know what would have been unless I reverse the volume reduction mods. After reducing from 88 cubes to 63 cubes, with roughly 33Hz tuning. No longer breaking screens. It does 159 roughly from 30-43Hz. Not clamped it, thats going to be next week when I can spend more time on it. Thats the current baseline. Lots of work is planned, when I get time All tests were done dB drag sealed up. No RPMs were used just the van on Idle. Thanks.

NICE!

Thats how we were before a show this weekend.. And how it was at the end.. Then got recovered home..

30-33Hz works real well. The amp will be fine, You will need Dual 1 Ohm subs.

It broke purely from pressure not flex, frequency was too low to make it flex. Flex has a ripple it goes all the way across the shield with equal pattern of shatter...pressure looks like a bullseye target. The screen caved in. This was just on a burst at around 34Hz. Taken a week to get a replacement. Got installed today and it broke before it even got fitted :cry: Seems like it was a defective screen. Had to install it otherwise i had a gaping non-water tight hole.. it wont last very long though I will find out in the morning with some torture testing with some help with some 50mm clear tape. If it holds up I'll be a show at the weekend.. if not I'll be waiting out a week for one.. Sucks ass to this side of the pond sometimes!!

You have e-mail Manish

its not Steve Meade?! Can't seem to avoid you anywhere these days, that i'm avoiding you lol anyway did you get my e-mail?

All for today