tv559

Droch stood for Derek Rocha and he passed away in feburary.

I am thinking of buying an DC level 5 18" Sub but I wanted to know if I had enough power. I have 2 Sundown 1200's so roughly 2400 watts. How would it sound with 2400 watts in a 8 C.F. Box?

Stock alt, 2 Big ass batteries in the back and it holds up for now until I get an HO Alt. I got the Sundown 3000D from a Team Member used.

Ok guys I finally got everything in so Im having my box built early next week. Here is a Design below for my 2 18" Level 4 XL's:D. Its going in my 03 Gmc Sierra Ext. Cab taking the back seat out for this. Specs are 190 3/4 sqin port area tuned @ 33 hz and is 11.27cuft after displacements Everything thats going in the truck Plus 2 Large batteries and the MLA module which are not in the pictured And the actual truck I will update with pics when the box is being built..

Very Nice Numbers :bigclap:

Its getting worse. I've only played about 10 Minutes at full tilt Since having it. Its really messin up my truck.

Yes I built a level floor then put the box on it. Sure feel free to use the design. The MLA module just give you higher voltage and it isnt really needed but will get more voltage out of it which equals more power. As for the batteries hook the positve in the front batt to the rear battery same for the the Negative.

New vids Shirt trick More flex

Here is a couple vids I made today. Camera really doesnt catch all the flex:( but it will do for now. Here is the second vid at 29 Seconds you can see how bad the roof flexes.

Update: I was able to hit 145 on music with the Subsonic Filter at 45 roof flexin like crazy and this (Below) I'll get more numbers after I dynamat the roof , Get a HO Alternator and the MLA module in;)

I rolled it on and how did you apply yours? ? mine was spray. i wish i would have done mine differnt. how much did it cost you? It was about $50 for the roller kit and liner and I had plenty left. The best way is rolling it on cause it has that little rocky stuff thats in the liner you cant spray thats rocky stuff on.

Thanks.

I rolled it on and how did you apply yours?

Thanks its a McGaughys 4/6 Drop.

Quick update Will have some TL #'s Thursday. Anyone wanna guess on what I'll put up?

Im am using a stock alt for now. I have a 4.8 V8 as well. What is your voltage like? I just bought a DMM so I'll have it connected to my batteries to see where I dip to. Does anyone know how accurate the voltage gauge is on a vehicle?

No dynamat at all. Idk why but it seems like the 99 and older trucks are a lil more flimsy and the 99 and newer are a lil more solid. Cause I know someone with a 94 Silverado and 1 18" and it flexes between the cab and the bed of the truck bad and he puts tennis balls there. Mine does flex but sounds more solid and hits hard.. Im turning the gain up today and tuning it so I'll have more vids:)

Im am using a stock alt for now. I have a 4.8 V8 as well.

Thanks guys^^ Here a quick vid I made volume was at 21 on a Pioneer Hu. I'll have more monday after I get it tuned.

Thanks that rhino liner looks a million times better than carpet imo

Pictures of the install. Its a big ass box

More pics of the box.

Yeah its rhino bed liner stuff.^^ I will post vids after the install.

A couple quick pics of the box. Everything will be installed wednesday.

Might have to get more sundown amps with those prices;)