slim2fattycake

fixed.

eh, you're going to waste money for no difference if you go from the ap1500 to an saz1000 but its your system and money.

The ear can hear a difference between 1hz frequencies but cannot hear the difference between box tuning of 1hz.

hahaha what a tool. what was his system? nothing, right? that's why he's talking.

Thanks. So two 6" couplers, two 6" flares, 12 4" couplers, 6 4" inside flare, and 6 4" outside flare.

dependent on your box but both should be able to get down low. The Q is designed to do it easier though. It's up to you.

facepalm...

If you want to stay under 200 then you can get a audiopipe ap15001d for 150 or an audiopipe ap18001d for 190.

You do know that Fi has a website that you can buy direct from. They also don't have dealers. AA is the dealer side. You can wire either one to 1 ohm. It depends on the coil configuration you get. You want to get dual 2 ohms to wire a 1 of the to 1 ohm.

don't forget to use your subsonic filter.

where is this?

The only lanzar I'd get is an opti drive.

it depends on the volume of the box and the power. You may need subsonic filtering even in a sealed box. I think all sub amps need to have this feature. I hate those fixed subsonic filters as well.

It looks to be dual 2 ohm so you can wire it down to 1 ohm to your amp.

What is the coil configuration of your 15s? Also, you can do 3.5 cuft NET tuned to 35hz with a single 6" aeroport about 14" long if you have the space. Sub and port displacement should be around .35 cuft and a couple of wooden dowels shouldn't take up anything really.

As long as it fits in the trunk and I can get to the spare tire in case of a problem whenever I need. that doesn't tell me anything. Its not like I have your car in my garage. Did you build the box for the two 15s? What's the dimensions on that box? You may be able to get a ported box with the same dimensions as the box you have now.

Fi doesn't have dealers. You're thinking of AA. What's the maximum dimensions you want to give up for a box?

I say try to flip it around to where the subs face into the cabin and see what its like or build a box for the one 15. I still think 2 15s sealed is louder than 1 12 ported on the same power if your not in depth about firing and position testing. Those subs look to be pretty good subs. I have always wanted to try the 8 or 10s. If they're rated for 1000 watts then why not use one and sell the other? you can get a ported box for a 15 with an aeroport in there. If you can get a sealed box for two 15s in there. It would save you money or more than likely gain you money but still get you the goal you want. And really make sure that you like LOW bass or high 30s to 40s bass. Lots of normal rap songs peak in that range.

Well I picked up 10' of 6" pvc and waiting on argent to get a quote for the flares but if I cannot get a quote by next week, I'll just buy them somewhere else. I may not have two 18s to play with now because after reconing both the 18s, the ixl still had slight rubbing or some type of noise when I pushed down on the cone. I really don't know why. I checked gap and spacing and there was no motor damage so i cannot figure it out. However, I can always do a 12" build for music if I need more up top from the avalanche.

NVM

uh oh. sound digital in the house.

That is an epic picture lol. and 24 current viewers