slim2fattycake

i told him about both in due time already. noob.

how bad is the felt behind the cone? too much slap?

hells yeah, but is this for comps? I'd tune them lower to destroy the low end but that's me.

select 23.8 seconds of the track anywhere you want to check or select as much as you want and it will narrow it down to the first 23.8 seconds of the selection. Then go to analyze and plot spectrum. Then change linear frequency to log frequency. then change 512 to 16384.

Good job at not knowing wtf you're talking about. Because it's smaller in size, it must be weaker and less efficient. Seems like you're trolling the 60s.

nice

get a DMM and check your voltage drop with out load and then check voltage drop with load.

You should update your website as well because I tell a lot of people to go to you guys and they say their vehicle isn't supported on your website.

Wow. Please tell me your like 14 years old or something because if you were any older, you shouldn't be allowed near plastic bags.

Does it feel weird to say that? lol.

there is no way that is the BL. its either SSD or Q, I have had all versions except the newer Q of Fi's subs.

Those terms are starting to be like the SQ term.

Curious, why did you buy a Q when your goals are loudest setup? Either way, very nice driver. Yep, you should quickly change your order to a BL. QUICK! I should clarify, I want loud AND clear, not shooting for SPL numbers, esp with my limited enclosure space.... Q seems like a great match up, no? Just wanna make sure the enclosure isn't too small No, the AQ HDC3s sound clear but they are so far away from the FI Q. And for the enclosure size, you should have at least gone with a 12" sub if you wanted to go ported or go sealed with a 15".

That wasn't a smart choice. Why don't people research?

yes. below 20hz.

WTF are you talking about? You didn't give any good descriptions or pictures of the problem. We are not there or are we in your head to know wtf ever you are trying to mean.

get a picture.

Sure, it was built right? And seems twice as loud doesn't really mean it is twice as loud. You perceive different frequencies differently and your vehicle's resonance frequency may have something to do with it as well.

What else about the box? and how much power and whatnot? The Q is quite competent for the lows and you cannot put a btl recone on a Q. I would say its the box. Also, Describe the sound better please. Because not liking it doesn't mean anything.

I bet clipping the shit outta it and box is shitty. Just saying...

It can be fixed. I talked to the owner before the OP and he had gotten quotes from sub builders and they can do it so Nick can do it unless the seller was lying.

BOO YA!

this thread is funny. :bandwagon2: