EdMan71

M5, do you have any issues with upfiring. I'm sure tempted to also upfire, but read alot and most think downfire is the was to go. Just difficult to get much over 2-3" room from baffle to floor. I think with upfire I could gain over an inch of depth. I am leaning towards XCON's but 7.25" mounting depth really cutting it close, esp to have 2" past surround to floor. Still trying to get a measurement from baffle to surround. Looks to be like .5-.75" or so. Excursion Room, there, I said it again, for those who enjoy the title! haha Thanks for input

How much room do I need to have between bottom of box to the floor of truck? I am building a downfiring sealed box (may go ported with 10's) for crewcab chevy. I have just right at 3.0 ft^3 airspace after displacement which is exactly what is called for for the 12" Fi Q (x2) if I have the legs on the box at 1.75". I just needed to know how much room to clear sub. Thanks in Advance!

Sounds good. I was still wondering what the length is from baffle to surround, so that I could mock uo box to get a more accurate measure on mounting depth.

I have not ordered subs yet. I was hoping someone could tell me so I can finalize box and fully decide on sub. Thanks for input.

Do you happen to know how high the surround is from baffle? So just to clarify, height of subs surround plus 1.5".

I was needing how much do they come out past baffle and excursion room to determine how long to make box "legs". Currently they are 1.75" which is what I see some of the prefab boxex are. Just really didn't seam enough.

No. The reason is they have 7" mounting depth, so having to be careful not to get them too high in box. Since I have about 7.25" to work with.