Truconcept

Hi I recently had a box built by someone and I want to make sure the tuning is right The ports should be tuned to 33hz The box is for (2) digital designs 2500 12" It is a dual 12 box, sub + port firing foward 34W X 14H X 24D outer dimensions 2 ports come together in the middle and are fully seperated til an inch from the front the 2 chambers are completely seperated down the middle an outer dimension: the port walls on both sides are 18 inches long into the box inner dimensions the port height 12.5 port width: 1.75-2inches (starts at 1.75 at top, slanted to 2inches by the bottom) I hope this isnt too confusing I can try 2 take pics if needed but id have 2 figure all that out as ive never tried sending pics to my email from my phone If you have a calc screen shot or anything 2 prove that the tuning is wrong or anything is wrong im going 2 print out your response and take it to the guy for a full refund he claims he used bass box pro which i know is legit Im just not hitting the lows like I should -thanks

just took the chamber divider out of the port, sanding it smooth wiring subs next

theyre on one of the brz1200 @ 2ohm back to 1ohm each DD when the lanzar opti's are gone

i like my $1,000 build!

im actually looking into a more powerful amp 2 put on the 2 DD's and for someone 2 buy the lanzar box (part of why its hooked up) shouldn't be a problem at school this week im still waiting 2 hear some flaming about the doors rofl how many forum newbies join with their shit together? i hope u all now understand why im here

digital designs is the sheeit tho

i really thought you guys would just laugh at this like me Nope those are 2 Lanzar 12's in the fold down box lmao. I still don't understand this guy, one day hes on chat saying hes 15(Cant even drive yet)? Now hes here saying school tuition is too high? what ru talking about lol, this is the 2nd time ive seen you post that im 15.... im 17 i dont even remeber you. thats the plan lol the sub on the back seat was just 2 try and everythings screwed down tight how would i be in any danger?

i should be a supporter im gonna have a lot of i need help threads!

just did it yesterday lol i dont picture this setup lasting the week so far im impressed by how much louder it is than just the DD tho loud isnt always pretty and wtf do i care whats behind me haha! however around here, stuff on the backseat just is not going 2 work how about the jigsawed doors? first time i ever tried anything like that

no such thing as a 3000 watt brutus... unless your talking about the bx1500D which claims 3k peak.... (1500 @1ohm) if you are running that bx1500D, put that $300 into an amp with more bang how do you seal off a truck? What makes you think you need another battery? Do you have a volt meter running thats giving you low readings? If your satisfied with your amp, and if you dont need 2 upgrade your electrical maybe look into some sound deadening.... that would "make your system better"

I cant find a dl link for torres that works anymore any suggestions?

How is the enclosure over sized if each chamber is 2.2 and that what the subs call for? how is the port size too small? what should it be? which box calculator progam do you use? I'm looking for someone with bass box pro to put in the measurements provided and screenshot/post the results so i can print it out and show the dude whats the bad thing about the port being slanted the way it is? port noise? I dont have much of an arguement 4 the guy as of yet I cant just go 2 him like it was poorly built

yes its slanted and half a inch thick, rounded

the seperator down the middle divides the two chambers there is 2 seperate ports i paid cost of materials but ill get that back if i can get some screenshots of some calculators saying otherwise

port wall is 18 inches long, no L 2.4 per side idk i mentioned that because it doesnt seem right 2 me, do you agree? pics coming soon

i would hook the speakers 2 a house stereo and pray that somethings wrong with wires or the headunit in the car

you should hope that you made a mistake in wiring as that is the easiest solution dont get butthurt because people suggest that I dont have anywhere near 20 years experience but everyone makes mistakes if all you smelt was a little burning and turned them off they might be ok that couldve just been some glue you really have 2 hammer those fi's 2 blow them unless your fully set on shipping them back try hooking just one up why not mess with them while your waiting for a response from fi?

Hi 99 Oldsmobile Alero Yellow optima up front and one in the rear Powerbastards 220amp alt knu 1/0gauge (+ and -) front to back, big3 as of today. no fuses. problem persists Im getting a drop from 14.4 to as low as 13.2 when I bring the car to a stop Sometimes it stays at 14.4 when I stop but most of time it dont 13.2 is about as low as it gets, its random and sometimes doesnt drop at all I only get this reading from the rear battery I dont have any of my amps connected, no sound, still a drop The rear battery is grounded to the negative in the front I have also tried grounding the rear battery to the point under the seatbelt bolt that i have used before (no luck) The front battery is grounded to some metal thing thats bolted to the side of the engine Im sorry I cant be more specific The mechanics who put my alternator on made that the front batt negative ground They are good so Im gonna assume thats a legit spot When I start the car I get a 15-15.2V reading but Im just assuming thats from the freezing weather reducing resistance Any ideas?

Im jealous of your flex thats sick! Whats the sound/car audio laws in japan anyways? Im gonna guess from the posts here that you're military, do the MP's hate on loud music? Nice ride! lol @ excitement over a girl with subs someone needs 2 tell fat ugly girls all they need is a loud system 2 have a forum of guys who want 2 hang out

Kind of annoying really. The mounting of this amp is impossible with my drill because the screws go so far down in the hole Im gonna have to use a screwdriver The negative input to the tweeter had the wrong size connector for the crossover It was small while the crossover had all large outputs was too small to connect to crossover i was really hoping to not have any small issues when i went with RF

They make long bits for drills that you can use. u mustve not read all the posts on this thread, which is bad cause theres only like 5 Sorry I missed that. im not sure why but I stared at the dogs in your pic for a while if they ran as fast as they could head first into eachother would they be dalmatians? nvm.

im just looking at the diff in xmax 18mm BL vs. 28mm Q im no pro but my guess is theres a tighter response from the BL theres a vs thread on here for the subs in question too http://www.soundsolutionsaudio.com/forum/topic/46403-fi-q-vs-fi-bl/

They make long bits for drills that you can use. u mustve not read all the posts on this thread, which is bad cause theres only like 5

i thought the Q is more of a low end sub for your music taste i think the BL would be a better choice