todd.brust

yeah get rid of the rainbow lol but props to you on making a living playing music...that is awesome...do you play with a band or solo or what? i'd be more than interested to hear some of your music seeing that it's probably jazz(your username is a dead give away...lol)

well if you don't car about sounding good, then forget running active then and get a cheap passive set, turn the bass way down and the treble way up and crank your gains! i love it when people do that LOL!!

lol...what else is sitting in there...do you want a TC-1000 to add to your closet collection...lol

sweet...maybe i'll just get a new cone...lol but i want to takt the easy route, so i'll probably get a blank dustcap and draw on it with crayons...lol only joking...i'll use paint markers

well the brahma started to sound funny so i pulled it...i figured the triple joint that i fixed came undone...but i guess i did a better job than i thought because the triple joint is fine...the spider came unglued from the frame! i plan on fixing it until i can afford a re-cone to a different size, but does anyone have any good tricks to align the coil so i can glue the spider back on? i figured i'll probably have to remove the dustcap and use shims to align the coil but i figured i'd ask.... anyone know where to get replacement dustcaps?

i'd still concentrate on the front stage if you want a truly phenomenal sounding vehicle....but based on what you are asking, they are all pretty good subs so it's all up to you

how about the new Mazda RX-7 that is suppose to be coming out...haven't seen any pictures yet but it is suppose to be pushing around 300hp from a 1.6 liter N/A!(rotary power of course) so i can only say that it will probably be an awsome car

lol i'd have on goofy looking speaker....i wish i could find a duscap similar to the RE cones, like the SE cones...a big dish, or even better the old eDuh A series flat carbon fiber cones...i'm not too worried about adding mass to the driver anyways, it'll just lower Fs and change a few t/s parameters....

don't even try it! lol i'd try to e-mail Fi...i asked a while ago and never got a reply on here... too bad i am broke now....let me know how this project turns out did you sell the MT yet?

you would think it would work....but i want to play it safe, plus i already have the dustcap removed so i can just shim it...i just have to stop being lazy and find a dustcap so i can get it working again!

i might guess a w3....i know the original w3 series have stamped frames and the paper...maybe an original w6 series or w6ae, but i don't remember if they have a stamped frame my only guess

never had a problem like that! i have no idea how you could fix it....can you move the pole piece around? if you can i would find a way of centering it then gluing it, but that would prove to be difficult....iirc the motors are assembled before the are turned into a permanent magnet, i would just find it hard to get it truly center with it wanting to move around so much

wow i am more than impressed with the quality of the woodwork and the design is this school project or something?(the MTU in the title got me curious)

i don't have any experience with the customer service...i heard it was good...i'm not a huge fan of them and their cult... they used to make awsome subwoofers but their new stuff has never impressed me much...but the nine.1 has been a very dependable and beefy amplifier for the price...i know at least 5 people with at least one nine.1 and none of them have ever had problems with them and they definetely will pound

i forgot the link http://www.edesignaudio.com/edv2/product_i...;products_id=44 the one thing that catches me about eDuh is their warranty also 5 years!

that would work.... as for the voice coils, it would all depend on what amp you plan to use....if you used that Hifonics, you would get the Dual 1s....Wire the coils in series so each subwoofer has a 2 ohm load then parallel the two together for a 1 ohm load.... look up some wiring diagrams and figure out wiring speakers for proper impedances...this will help in your search of amplifiers...but the Hifonics would work...they are a good Budget amplifier but i hate to say it..but i think the eD nine.1 would be a better choice for you...i'm not a huge fan of Elemental Designs but the nine.1 is a good amplifier capable of putting out more than the rated power...like JimJ said...you don't need 2K Watts...1200 would be fine(even though i have read that bench tests show its around 1400-1500 watts)....

that think is wicked! where'd you get the money to fund this?(all the speakers?) i have never seen this done....what is the advantages/drawbacks of this? and last question..lol....what are you going to power the speakers with

WAIT! do you have the Dual 1 or dual 2 ohm coils?

Like JimJ said...all depends on the install/application.... i've seen cars with 2 10" Solo Xs hit higher numbers than 4 12" DD 9500s with 2 rockford 4000w titaniums and at least 1500 in batteries...it all depends what you're going for....i'd say either will be loud..hard to tell what would be louder, but i'd say the BLs would sound better

Telarc does a good job with The Planets, IIRC theirs is the Atlanta Symphony Orchestra. I can't remember which version the MoFi one is, but I had it before my hard drive crashed and it sounded pretty good as well. I hear amazing things about the Vienna Philharmonic's version, but that was done in the '60s for Decca and I'm not sure if it was ever put on little shiny disc... i have the Zubin Metha LA Philharmonic Orchestra's version in my iTunes, i am assuming that it's the same as what you are talking about, it sounds good to me(although my ears aren't trained as well as some other people's) Mars, The Bringer of War is an awsome track from The Planet

that is a badass sub! we need some specs!

yeah a bunch of us are over at force, but that is kind of dead.... but about your SUb....DAMN those are ghetto tinsel leads! lol but i would almost vote to fix it...personally i would replace the tinsel leads and order a new surround from Fi and then use that for anything you can...lol it'd probably be a killer HT sub...that's just my opinion...i'd fix it just because i have always wanted an 18" XXX about the atlas...i'll pay shipping on it

i know what you mean by in the stage of listening to classical(but not classical for me), i have recently gotten into a bunch of different music...it used to be strictly rock and a little bit of rap, but recently i have gotten into some classical, a lot of jazz(armstrong, coltrane, davis, zappa, etc.) and even a bit of techno...lol but if you're looking for good classical... i'd Suggest Holst-The Planets there are newer recorded CDs that you can find on the internet...maybe try and DL it first and check and see if it sounds like it is recorded in modern times

those are decent in terms of good sound in my opinion....are you more concerned about it being good quality sound or chest thumping bass if you want the good sound, i go with Fi, but i'd upgrade/downgrade to the Q, if you want loud i'd go kicker or the Fi BLs the w3s don't compare in terms of output to either of the mentions above...but w3vs do sound very good

i'm voting the wall socket then taking it apart...where'd you get the 18" XXX anyways? oh BTW nice to see you around