eclipsepb25

all any one needs to know is that second skin is superior to dynamat in all aspects and i can vouch from personal experience with using dynamat in my car and hearing SS in nick morgans truck. the difference would lead people to believe that there was not even an ounce of deadener in my car

i guess it doesnt have to....

alrighhtttyy guys.... i got a different build that i need some help with because i realized the two SPL15s had a slim chance of working out =[. I'm putting a ascendant audio mayhem 18" in the trunk of a 01 chrysler sebring sedan. The sub is going to be front firing and im just going to keep the back seats down (when i put them up for people to sit in them i will just cut the subs off). The trunk is pretty flat and the box should be pretty easy to load in from the car with the seats folded down. I have L29 x W34 x H18 to work with. for you who dont know a mayhem is essentially a loaded BTL.

well now i realized im going to have to change my box design but no one was offering to help anyways so i didnt bother posting what changed. Now i have 24 x 35 x 16 to work with. The sub and port are going to both have to be upfiring and the box will be used for daily driving.

i've been waiting for some updates lookin good steve

common guys, this is actually important!!!! lol

alrighhtttyy guys.... i got a tricky build that i need some help with. I'm putting two SPL-15s in the trunk of a 01 chrysler sebring sedan. The subs are going to front firing and im just going to keep the back seats down (when i put them up for people to sit in them i will just cut the subs off). The trunk is pretty flat and the box should be pretty easy to load in from the car with the seats folded down. I have L29 x W34 x H18 to work with, Im guessing both subs will be put in one chamber. Im open to either slot or tube ports, just need help coming up with a design. All of the parameters are here. I appreciate it alot and please help a fellow forumer out =]

allllright.... mods please delete this as i'm starting a new thread so it can have a relevant title

im pretty sure i could "eek out" 7 and then have a port.... and i have the room for everything else, common guys please show some optimism!

the way you are sounding you should go for the BLs with out a doubt, but i think id look elsewhere for amps besides MTX and the PCA series for soundstream.

good luck and hopefully after you get back my sub will be good to go.

hey man.... thanks so much for all of your help these last couple of weeks and how nice/cool you've been about everything. sorry about your loss and we all understand how important it is that you be with your family and friends right now. talk to you sometime soon man, take it easy

Nope sub was not dropped, motor isnt shifted. Its really frustrating. It literally wasnt rubbing one day and was the next, this is honestly the kind of luck I have. I'll have to call Scott and just send the damn thing to him to go over it. Thanks again for help.(no sarcasm intended) seeing as your new and dont have too many posts and ford302redneck is a little bit more established and wasnt trying to center you out or be mean.... i would try and be a little bit more respectful. hes just trying to help you, dont post for help and then get smart when some one makes a suggestion. besides, you obviously arent too much of a regular or else you would realize people do indeed do VERY stupid stuff so you would understand why hes just trying to make sure you press on the center of the dust cap or if you dropped it.

id go for a 18" fully loaded BL in its optimal ported enclosure

you defintly need all of the options if you plan on using 4kw and a huge electrical system backbone. the reason they say not to get cooling if your using it for SPL scenarios is because it machines cooling channels into the motor there fore losing motor mass there fore losing acceleration and power. but you NEED that cooling if its daily, you can get by without the cooling if used for competition because its just short periods of time and you get the added motor mass

Wine-O ft. DJ unk - Hokey Pokey Fabo ft. Young Dro - How ya do that Gucci Mane - Thats my hood Konkrete ft. Big Boi - Whats that smell Lil Jon ft. Scrappy - What you gonna do The Pack - I'm Shining The Pack - Ride my bike TumTum ft. E40 & Rick Ross - Caprice Music USDA - White Girl (remix) Yo Gotti ft. Lil Wayne & Birdman - I got em

so yesterday when i was riding i started to smell a funny smell... and then a couple minutes later my sub cut off. I was running my amp at little less then half gain, LPF set at 120hz, and subsonic set at 35hz. Today i tested my amp with some other subs and the amp is fine, so i take the BTL out to examine it and i cant find anything wrong with it. Tinsel leads are still soldered and the VC is still attached to the cone from what i can see. No rips in the spider or anything like that. Its fully loaded as well so it should be able to handle alot of power which. Can anyone please tell me what might be wrong with my sub and what i can try to do to fix it or will i just have to get a recone? thanks -wes

no i havent yet and its set at actual half gain, The prevolts are pretty sucky though. I think like 2 volt output

wow.... my bad, i meant to say LPF. sorry that slipped out of my mouth but please some please help ASAP

alright, ill head over to lowes or home depot and get some. thanks!

It's finished for the most part and I will try to have a video up soon, the equipment used is listed in my signature. Please give me comments and criticism and take in mind this is my first ever install and I'm still a 16 year old in high school, haha... so nothing to harsh =] thanks to all on SSA forum who were here for me while i was gathering everything for my install and during the actual install!

use the plumbing strip for what part of my question?

would would be the best material used to absorb vibrations between the amp and box? and also i want to secure the batteries but im blank on ideas... please help!

ok... so i know everyone has already seen one before but everyone also knows when you get it in the mail all you want to do is show it off. incredibly sexy, dont hate. just love. 15" D1 BTL cooling, 3rd mag, hixm coil, daily. In 6.5 cube ported box with internal spine bracing. 5 cubes after sub, port, and bracing displacement tuned to 39hz. thanks to Josh Salrin at www.finecustomworks.com

im actually pretty interested.... im not sure how far that is from central VA, but if its not terrible i would most likely show