Gametrade

Well now....I live in Sacto, work out in Fair Oaks....I need a demo!!!

Ok, Im going to build a fiberglass box.....done a few in the past, but far from an expert (ill have some help). Anyways, Im going to try building around a 12" Fi, and probably a Hifonics BXi2006D = 2000watts @ 1ohm. I will be mostly running the sub for short periods, 30 minutes or less. There will be rare times when I take a trip and will be running the sub for longer periods.....but most likely not at full blast. Im leaning towards LSQ for the most part, but SPL is important as well. Which sub would you recommend, and which options? PS. I live in Northern California.....we get 100+ degree days, but normally when it is that hot, i wont run my stereo very loud, as i run the A/C.

Thanks for all the info. Can you give me some newb info on the dual 1 vs 2? Never seen this option before. Ill be running the BXi 2006D Hifonics: BXi 2006D..............2000-Watt Super D-Class 1 x 650-Watts.........................RMS @ 4-Ohms 1 x 1300-Watts.......................RMS @ 2-Ohms 1 x 2000-Watts.......................RMS @ 1-Ohms

Thank you very much for the info. Personally I want my equipment to last, so I normally have the gain set pretty low, I only RARELY push the sub to show someone what it can produce. Ill prob stick with the 12" BL and either the Hifonics Bxi1606D or BXi2006D....ill look into the ported box options since I dont have ALOT of room in my trunk....and dont want to use 100% of it for this box (2001 BMW 330i). Going to be interesting since I had a JL 10w7, and it was in a 1.25cuft sealed setup. Almost doubling that will be fun.

Thank you for the response. Is there a thread somewhere can give more specifics on the options. Ohm: dual 1 dual 2 P Chamfer: no yes +$10 Cooling: no yes +$40 Flatwind: no yes +$20 Daily or SPL: Daily SPL Extreme Lead: no yes +$5 Universal: no yes For the BL....can it handle the BXi2006D? Im not sure because I dont understand the options enough to know if it can handle that kind of wattage (1600-2000).