FoRgIvEn

sorry meant 1x AB vfl 450.1 1x AQ3500 2x AQ2200 it was originally going to do 2 SA-15s but its going to be 3 15s I have 2x stock 130a alt, big 3, 2x runs of 1/0 from a stock n1 bat to a stinger in the back

which would you suggest 2 x american bass vfl 450.1 or 2 x audioque AQ2200 or 1 x audioque AQ3500

Reread my first sentence, and look at the impedance vs frequency graph, and you'll understand. sorry i was tring to scan through it and put together with what you were telling me now that i took time to read it carefully i understand the graphs better, thanks to everyone who put info in i appreciate it

okay so when people say there wired at 1.6ohm but after rise theyll be over 2ohm what are the actually reading

is there a control knob out that alows 2 amps to run off 1 knob? are they better than the factory knobs?

Ive read alot of people talking about it some argue theres know such thing but... what is rise? how does it affect your system? is there a way to couculate it? is there a free program to help factor it in? i hope this dosnt cause any problems just wanting to learn

Im thanking of putting 3 SA-15s in a 4th order wall and ive read around and some say a 2:1 ratio and some say 3:1 ratio and to tune port side highh 45+- i know it changes from vehicle2vehicle and power but what is the best place to start? and any ideas on what size it might need to be? (for a rufe estament)

yeah i know ive seen on youtube were people are putting like 5k to 2 SAs if 3 SA's gives me a 1.33ohm then with the box rise i should be could on the ohm load to strapped(i thank its 2ohm stable strapped?-not sure though)

thanks everyone 1 last ? wouldnt 2 bc2000d be way more than the SA's can handle

If you're a cheap bastard like me then you probably want to think Tenney or Singer. Both of those guys are getting a pretty decent rep here lately. I haven't dealt with Singer, but I got one of the 270's he had on Christmas special for $240 right before Christmas and I am still waiting right now. I had a feeling it would be like this and he has changed the time he said he was going to ship a couple times, but I will keep asking until I get it and hopefully all will come out ok. ive looked at singer but not the other i google it now

I havnt bought anything yet im trying to figure what to buy and what type of enclosure to build ive planed on the wiring upgrade and batteries still not sure of the alt

Sorry it was @.66 here is the video that i saw it on I thaught they came as either d2 or d4? do they come in a d1??? its not a daily driver its something i take out every now and then when its just me / and wife not enouph room for the kids so id like to make it a project thanks

can some on tell me what the ohm load will be on 3 sa15s? ive used a couple different calculators and @2ohm they say 1.333, and @4ohm 2.7 but i was looking on youtube and some one says there getting like .67??? and what amp would you suggest the bc200 or bc3500? thanks