TLM

He drove this beast by my werk today, and played it for 5 seconds....and i heard it from the back of the store (probably 200 ft from the jeep) and he had his windows UP.....

that was ummm surprising, to say the least(i didnt wanna give it away)

that sux man, it was 80 here today lol

yea man i just found out i got a REAL good deal on another one........sorry man

Alright guys I need your help, Ill most likely be getting either an sx 10 or 12 and i need suggestions for an amp that i could use to power one of these beasts. Ill be honest, Im poor lol so the cheaper the better! Thanks Tom

Lookin good Brent!!!......o i mean Kent Brent....Kent , whats the difference?? Tom

well, first of all, my name is TOM hhahahhahah (check the sig lol) second, i just make a rough sketch actually and build as i go, i just didnt wanna sound stupid by saying "durrr well i just go out there and start cuttin" lol Tom

heres a few more ive noticed for people such as myself who are forced to build boxes with limited tools.. -get a 99 cent box of rubber gloves and you dont need to worry abt getting liquid nails off ur hands -the only saw i have is a jigsaw, so when making straight cuts get a looong straitedge and clamp it to the wood (making sure to clamp it exactly parallel to your line) and just run it along the straightedge. Still not perfect, but most of the time better than just "eyeing it" -a square is your best friend. As said above, cut from the factory sides, but ALWAYS use a square, to make sure your cuts are exactly 90 degrees. Theres nothing worse than using half a sheet of mdf on one piece of the box then realizing its not square. -I find that having a planned design is always helpful, but more importantly, when adding each side of the box, set it in the area where its going to sit in the vehicle to make sure your measurements are right and that you werent overlooking any parts that were sticking out or anything like that. This mostly only pertains to vehicles with limited space such as a small truck or whatever where every inch counts. thats all i can think of for now, but this is a good idea for a thread, lets all throw in our $.02 Tom

Yup I finally made a decision and the sub is in the mail!! My sx12 will be arriving soon and I need to build a box. I want to give it about 2.5 cubes after port displacement tuned to 34-35 hz. Building the box is not a problem, I got that part down. I just need help figuring port area/length. So any way you guys could help out would be awesome!! Thanks Tom

well ive heard the "console port" will sound bad.....is this tru? if it wont affect the sound then id like to do the console port, but if it will change the sound at all then ill put it behind the seat Thanks Tom

i see, sry abt the mix up well its too late tonight to go measure so ill do it tommorrow and keep you guys posted!! Thanks Tom

haha well, i can get 4 cubes if i HAVE to but id lose 2 clicks and i really dont wanna drive like that but thats the most i can lose and still actually move my legs i dont have dims because i need to kno gross volume before i can get dims (or else what would i be measuring haha) hope that helps... Thanks Tom

wow thanx for all the replies, but i need to specify a few things... -i want a slot port -itll be an odd shape because i have a reg cab truck, so im trying to keep it down to 2.5 cubes after port displacement (or "net volume" as u called it) -i can figure out airspace of the rest of the box on my own (id need to so i can sqeeze as much out as i can) so all i need you guys' help with is the port dims -^also because of that, you need not bother with the dims of pieces to cut (thanx anyway tho, that was very generous) -ill be doing an inverse mount so the driver displacement should not be subtracted from the internal volume -yes ill be using 3/4 mdf I think this is all, but I probably forgot something. just tell me if i did Thanks again so much for you guys' help!! Tom

granted it looks kewl and itsa good idea, but its ONE dollar bills yea........"big" baller

so what do you think guys, this or my rims?

I can get you 25% off anything in hallmark lol I know, my job is pathetic

i go to unf (univ of north FL in jacksonville) and i got out like 3 days i think Tom

first of all, friggin sweet car man!! second, on this page>> http://www.sounddomain.com/member_pages/se...sler&model=300M << they have a few installs Tom

http://content.ugoto.com/?id=2203&type=4 lowest i got was 32 seconds

i can tell ya this man, i havent heard any of em but wit soundsplinter, you pay a lil more than the se but you get like twice the quality, and youd need the same rms for either one just a thought... Tom

I just saw it tonight and I also thought it was hilarious!!! Was it just me or did that one puppet remind you of stiffler?? lol Tom

which offer did you do?

OK guys I need your expertise and experience. I have been looking into these and I have been hearing completely differnt opinions. So what I'd like to know is... -How is the SQ? (I know the SPL pounds) -How big of a box have you guys been using?(ive heard that they need a bigger box than reccomended on the site) How many watts have you guys been runnin to them? (again, ive heard different than whats on the site) Thanx in advance Tom

first of all, you are a genius for coming up with this way to get people to sign up second of all, why dont you just create 5 email adresses wit yahoo or something and you can be your "5 friends" third of all, i just signed up for ya and i dont need any box plans Tom

What are you trying to do? and a few of those setups, youd hafta give up tons of space to do