garychurch84

same around here.everyone thinks its no name junk until they hear it.lmao

I searched and never found one... Still looking my friends! P.S. - Feel free to pm me with anything "slightly" out of my range you may have. I will most likely be looking for something used with my price range. I'd rather buy used good stuff, over new garbage. yea,I looked earlier it was already gone

I don't have exp.with the other SSA subs.But they hooked me with the icon.I would go with the GCON if it fits the budget better I promise they will not disapoint

You don't need full power.Just make sure you have a good box.

lmao

a pair of icon 12's in around a 4 cu box.mine tuned at 30 hz.they will get loud if needed and sound very well also

I've had my eye on this alternator but don't know if its enough or not. http://www.powerbastards.com/products.asp?cat=136590

There was a bc2000 on ebay for around that price

That mixed my post in

With my experience with the icon, my enclosure was 4.5 tuned to 32hz, my amplifier for that setup was an AQ1200, and it never felt stressed from that power, like I said, I think a 2k amp would be perfect, because you don't have to set the gain high, plus you will have headroom and will be easier on the electrical.I can agree with this.I'm at .5 ohms now,if I go full tilt its pretty hard on my electrical.but I don't do that very often.demo only.but it will start to cut in an out.ordered new 1/0 welding cable few mins ago an new fuse block.I got 0 gauge knu koncepts cca wire which is junk.never do that again.I'm workin on gettin this rightThis is not good at all. You might want to invest in your electrical instead of more equipment, and check your ground connection. This means your voltage is dropping down into the 11 volts range.

Yes sir,it is bad.but don't have that problem with my HU set for my normal daily setting.bass boost 0,eq LOW -6,subwoofer -15.if I demo it,I'll bring my subwoofer up to 0.I don't go over 40 on my volume

With my experience with the icon, my enclosure was 4.5 tuned to 32hz, my amplifier for that setup was an AQ1200, and it never felt stressed from that power, like I said, I think a 2k amp would be perfect, because you don't have to set the gain high, plus you will have headroom and will be easier on the electrical. I can agree with this.I'm at .5 ohms now,if I go full tilt its pretty hard on my electrical.but I don't do that very often.demo only.but it will start to cut in an out.

I got the nendo bc2000 powering two 12's now.I wasn't paying any mind when ordering the icons I got the dual 2's instead of 1's.its pretty hard on my electrical which is still stock for now,thinkin of chnging amps soonDon't switch amps, just buy another bc2000, run each sub to it's own amp and run at 1 ohm. That's what I would do for sure. For that much power, I would try to fit two d3100s. That should keep you in good shape. will they handle that much over rated power?but again the video I watch on youtube that I mentioned above,I think he used a mtx te4000d

I got the nendo bc2000 powering two 12's now.I wasn't paying any mind when ordering the icons I got the dual 2's instead of 1's.its pretty hard on my electrical which is still stock for now,thinkin of chnging amps soon

Is that you on youtube doin 149 with tthe icons?I didn't come close,only did 139.9 myself

Welcome

DC did a great job with my enclosure for the 2 ICONS.I would recommend him to anyone

2 icon 12s here.I really enjoy them.made 2 memphis 15s look bad.with my stock electrical on a nendo bc2000

Nice

thx man.that's not needed he said it just started this.was runnin it for 6 years he said.

Guy I work with is having a problem with his.it plays only with the engine not running.I got him rechecking his wiring.was curious to see what you all thought.

What is a canbus,never heard of it

Thx for the input,nothin more needed here