DanP

He's posted a few pictures of his Setup, although he Deleted the one where he had 2 Sub Boxes, and 2 different sets of Subs.

I mean if Jon was walled off this would be valid.... Jon has a trunk setup and it's a beast Even at that, hes running 6 Sony Xplods Jon still is probably louder.

Agreed

thanks i will pm after i purchase the stuff and begin install i am going to wait til it is a little warmer i could try jamming the door but my cars a 1999 so i don't want to be jammin on it tbh guys killing the door chime is a bad idea i have not looked into it but i am quite sure it is beyond my skills i get very nervous when messing with stuff un-car audio related and i will not lie there is a chance i could be turning the speaker on for music play atparking lot ricer events i want to be the coolest OR You could just pull the fuse, for the door chime, assuming on your car it isn't associated with the radio. I know on my Jeep it isn't.

Pepboys, autozone, radioshack, you can buy a toggle switch from any of them. Better off just ordering one off Ebay, as I saw a few switches for like $15 each at pepboys Nvm radioshack has them for a decent price

nvm

Shizzzon is steering you in the right direction, because if it IS a hardware related issue, reformatting wont do Jack.

I'm assuming you put the Micro SD Card, into a card converter to insert it to the PC. Does the card converter have a tiny switch on the side that says lock? sounds like you have your card locked.

try unplugging your laptop from the wall, taking out the battery, and holding the power button for 20-30 seconds then put your battery back in. Then try booting into safe mode w/ networking and update your graphic drivers as shizz said. my ideas are better than your idea roflll unplug and blah hahaha and display control or whatever its called on nvidia, excuse me why don't u submit some more brilliant advice instead of trashing mine i waited a couple days before posting, i just wanna help ive fixed laptops with blue screen errors by reinstalling windows before so im sharing and shizzon no disrespect taken i understand this is a technical subject idk how it works im just putting what has worked for me if windows registry has multiple errors then it could "overwork" the cpu to the point of protecting itself to the blue screen? Removing all power from the laptop resets Cmos, so if for any reason something in the Bios was changed, it would be reset to default.

Catalyst Control Center is a program associated with ATI/AMD GPU's and has NOTHING Todo with Nvidia GPUs, nor will it tell you if something is wrong with your graphics hardware.

Not to mention assuming the laptop only has 1 partition he would lose everything on the laptop.

If it was a CPU Cooling problem the laptop wouldn't blue screen it would just shutdown. The error its throwing is a GPU error due to corrupt Nvidia drivers, as shizzzzon said. Reformatting would probably do the trick but, that's assuming Rick has a copy of windows.

try unplugging your laptop from the wall, taking out the battery, and holding the power button for 20-30 seconds then put your battery back in. Then try booting into safe mode w/ networking and update your graphic drivers as shizz said.

I'm not 100% sure but I'd imagine it would draw power, maybe not a lot, but I would think it would draw something. Someone else here might be able to better answer that one. Just personally if I was going to leave it and not use it I'd disconnect it.

at the very least I would disconnect the harness's going to the amplifier, but weather you remove it or not is up to you. Leaving it there without being connected to anything won't hurt anything.

What kind of phone do you have? If you have an android, IMO You would be better going with a Windows 8 Tablet for compatibility reasons.

x2

What is the actual format the video is in? I know before you said you converted it to an AVI, and it increased the size which makes sense because .AVI Videos are raw video files, if you wanted to compress it you would want it in a .mp4 format, or in .AVI and use the video I linked earlier to compress it without giving up any quality.

A saw fence would be fine for sides, and length, but when I need to cut width in my case 40" it wouldn't do me much good? Unless they make them that long but if they did it would seem kind of hard to control. I've got a tool thread on here somewhere, search for it. Has a nice internet fence system. I don't recall the name although there is one in the garage. Add a $60 Makita saw and a $30 blade and you are GOLDEN.http://www.soundsolutionsaudio.com/forum/topic/7414-a-list-of-recommended-tools-for-building-speakers/ Just found it gotta head to class now though so ill actually look at it in a hour

Doesnt the SD card your using have something to do with upload speed? The guy at best buy told me to get a Samsung class 10 mini SD card as it was about the fatsest out there. Internet upload speed is most likely the cause of slow uploads.

Yes, it will drastically decrease the amount of time to upload, and only takes me around 5-10 minutes to render the compression

I used this for compressing my AVI's Takes them from like a 2 GB and makes them like 44 MB, and keeps the quality the same.

A saw fence would be fine for sides, and length, but when I need to cut width in my case 40" it wouldn't do me much good? Unless they make them that long but if they did it would seem kind of hard to control.

Interesting. Another thing you can do for straight cuts is use wood clamps / vice on one panel of wood on top of the panel you want to cut. Then you have an edge you can run your circular saw / jig saw against. I've tried this and I just can't get it right, It doesn't help that I have a cheap circular saw/blade, but if I'm gonna spend $100 on a new circular saw, this might be a better option for me. I haven't shopped around yet because honestly I didn't even know these existed until about half hour ago, but there seems to be a LOT of pricey ones.