bahnspl

Hmm if I remember correctly the 150.6 at 27hz is door open but on the DASH not kick. Bet would gain a few tenths on the kick. Now here is the thing. 39 to 40hz tuning. peaks LOW still and sound much better from what I heard. And surprisingly these are the BTL's and not the BL's cause I know the BTLs aren't suppose to be able to be tuned high AT ALL! I guess trial and error

ha ha i didn't mean has he. only means he can do over a 160 ::whistles lol. there are rumors he can break a 162 legal musical

No I definately know. It really sucks living in florida from that aspect cause there are a LOT of hard hitters down there. and I am sure his HURTS. but tommy's can do 160 bass race. but there again. he has an unfair advantage. not selling yours short AT ALL. Hell when i use to have my 3 15's in a daily wall in my taurus I was doing a 155 on a OLD audio control so like a 146 maybe on a lab lol. people would be like that is the loudest system in the world man damn blah lol. I was like I wish

I seen the pic on here about 2-4 weeks ago and I couldn't post at the time my computer was messed up and i can't find the dang post now. Anyways you were doing a build and had pics of it. I remember looking at the pic and could swear that looks like car tune automotive's parking lot. Is it?

Definately looks nice man. loudest in FL? that sucks that the bass 150to 159 champion lives in tampa. his stuff is CRAZY if you ever get a chance to sit in it. but that isn't really fair 24 12's and almost 30,000 watts I think. but definately nice install man. I would like to hear it lol

I know more about the cutting. that is fine. But say I want to do a massive wall. how do I account for flex between the bed and the cab. I would bring it into the cab just an inch and baffle it inside the cab. will it be ok or will there be too much flex.This will be a FULL cut through. window and all. I hear the boot the fits between the cab and bed/shell is EXPENSIVE. how much are we talking? just an est. 200? or 1000?

16 12's I bet that is it. can you send me the link of the build pics I bet that is it though. do you know if the pics were taken out by car tune automotive. any help would be great

Nope that isn't the one. I remember reading in this guy's signature that he is from new port richey

nnope this guy originally had like 16 to 20 subs I think. he had all the boxes stacked. dangit. grrrrrrrrrrr

That might be right remember there was a lot of build pics.

It has been a little while since I seen the pic and I was drunk lol but yeah. I do believe he had kicker. either way do you know if that is the crew from car tune automotive in NPR or if not was that where the pic was taken

ahhh just let us know what it hits on a termlab. still REALLY impressive. the only concern I have is audiocontrols even calibrated sometimes have problems. the shop by us a guy that normally does a 147 on a lab did a 161 on one the bad audio controls. not saying yours is nor trying to scare you. Heck even if it isn't a termlab. get it on another meter

Yes i am curious. was this at the kick (still with 1800 watts and 2 10's pretty impressive). And if it was at the dash was it with everything sealed up. thanks

Please include how many spiders each line of FI subs use and if it is different depending on the size please include that. I couldn't find this listed anywhere. Also for example IF the BL sub used 4 spiders and the ssd 2. are they the same spiders just more layers? thanks

OMG... I am soooo sorry. I was being rude in theory. When I typed the original "draft" for the post I put lets say 800wattsrms to keep all fair. I am really sorry. I must have accidently deleted the line. I just read this I am like what the hell are they talking about I don't get how they keep missing that. so I scrolled up and realized I was the idiot. I apologize again

Now before I get into this. I know it is install dependent. But lets say we are talking about 18's. All the 18's are in 8 cubes each. all tuned about 32hz. (or optimal tuning for the sub in question). Which sub is most likely to be the loudest stock if they all had the EXACT same wattage. I always hear about power handling etc. This is something that is important to me. The few post I have seen that somewhat asked about this kinda got redirected to how much power are you using? See BTL is the highest line and has probably the strongest magnet. But is STIFF so I think that hurts it per watt. So same power same box and opt tuning please any help would be greatly appreciated

That is what I figured. I kinda though people would think I am a corporate spy when I asked. i asked cause that is what effects how stiff the sub is(well I guess that is a obvious answer)See which does the best off per watt

definately no disrespect but I said same power through the whole post. I want to know which is loudest with same power for effciency

I was wondering about daily RMS powerhandling. I know every sub has imp rise,. But lets say I have a 15 " ssd with flatwound coils. Could I put a 1200 watt rms amp on it daily? or 1400?;

Definately not talking bad but I know RE started out at very nice prices then jacked them to just retarded high pricing.... Now please don't take any disrespect scott. But are the FI's temp pricing or should they try to keep within relation to inflation of cost? AGAIN and AGAIN this is no disrespect to scott. just doing a wall in the next year and have to decide which subs . please don't take this as an insult. just to the point

Very nice response. I appreciate the politeness cause I didn't want to be rude. May i ask what happened with RE and why then went so high on price if you don't mind me asking

to the top and scott ya there?

As it says. i am going a few options here. Also I have my graph open with 4 of the 12 inch ssd's. I can get them to graph how I like it but the question is if I go with a flatwound copper coil. How will it change the graph. And if considerably will FI send a copy of the new t/s parameters for me so I can regraph it

I am doing a wall in my zx2 and I am limited to about 10-10.5 cubes after all displacements. I was wanting to go two 18's. All of them really require a really large air space. I can put the subs in winISD in that box and it peaks at like 60 hz.Which would be fine if it was loud through 40. but it really isn't The BTL is the closest . It peaks around 55 and still strong through about 44hz. Played with a few different tunings same results. Wonder if changing to a flatwound coil and copper coils makes any difference or if I can have a different set of spiders on them to make them peak near 48-50ish in the box I can do. Again 55 peak is okay as long as I am strong through 40 and can play to 35 at an ok volume at least. I know when you change anything on a sub it pretty well changes the way the sub plays . But I want to know which specific options I should select to get this to play lower. thanks for any help. If I can't get it to work then I will have to go with 4 12's. but I really wanted the ahhhh factor of 18.s this is a totally daily setup up, no comps. Also to what degree can you play with this... Like I would prefer to use the BL's and wonder if I could get them down there but right now they are graphing WAY high in that box. any help is greatly apprciated. I apologize about the "long winded" post

It is a hatch back. LOOKS like a probe maybe. I am looking for the video to show my friend. litterally you can almost see in the hatch it flexes so much