qb420

Ok, as promised... I hope I'm not too late. Sorry for the delay. It looks to be a little over 5 1/4"

I have the older 4 ohm assasin but the magnet diameter seems to be the same... I can measure it tonight when I get home.

Your final impedence load is going to be either 1 ohm or 4 ohm... I have a similar setup with 4 Assasins, but they are in the same box. Nonetheless, run both boxes in parallel (2 ohms) then run the boxes together in series for 4 ohms. Any pics? What's the amp model?

Thanks for that comparison, very good to know.

Very nice work. Did you have to cut the doors some to allow for the depth of those mids? I'm redoing mine too and I can probably fit two mids on each side like yours but I would need to remove some more metal.

You must be the Devil, I just ordered 4 of those things after looking at them. Damn, I'm gonna be a broke mofo, but at least I'll have a hell of an IB setup!

Damn, I'm so impulsive... this is too good of a deal to pass up. I just put in an order for 4 of the 15's. I hope I won't regret this.

Email sent.

My bad, I put them in the AA section since the subs were Assasins...

Ok, here are some pics of the sealed box... I should have took build pics, this thing is reinforced pretty well. Those are the AA MTMs by the way, they sound incredible with movies and music.

I found this spot to experiment with Baffle building Baffle install Black paint Assasins installed Completed IB This setup consists of 4 12" Assasins, a parts express 1000 watt plate amp, and behringer feedback destroyer... It hits relatively hard and clean however my crappy drop ceilings vibrate uncontrollably which ruins it for me. I went with a different route with the assasins, 8 cubes sealed, sounds so much better to me. I can post pics of the sealed box if anyone wants to see. This is my basement, I'm gonna try another IB in the living room upstairs with some Mark I Brahma 12"s soon.

Thanks for the warm welcome. I think I'll post some pics in the Home theater section if anyone is interested..

Just wanted to say hello, I'm always building boxes and such and always hungry to learn more... Next project is an IB with 4 Brahma 12s, can't wait to get started.