jonbearsmt

i would sell them both and get a bl on a 1500...

did you change the inputs around.. to check for a bad rca or even a bad H/u?.... take your line inputs and change them and check again

i would only run 1..... u can run two... but chances are your gonna send that amp to clip town doing it...... whats your budget on amps again??

bad ass.com

keep inmind he said that amp would be great for ONE of those subs.

the 1500 is give it all it has to get in that pwer range.. make sence that the 3000 at 2 ohms is sipping a glass of sweet tea while perducing 1500 watts at 2 ohms

i hear yall....... for the car btw

i have 3 300amp breakers now... im popin one of them somtimes.. the onw between my amp and my rear cells,.. i know that once thay pop thay pop easyer... i bought a new one on ebay... i was stoned and bought another 300 amp!..... so now im looking for a 350 amp or a 400 amp CIRCUIT BREAKER... any ideas?

it will move them... but you should get a bigger amp... and imo u should get some new subs.... but even if you get BL's you will need a bigger amp then a 1500

also you dont have a awsome electrical system....... you should get one... and try to work your configuration down to 1 ohm.. and let that saz do its damn thing..

3000 x 1 watts @ 1 ohm 1600 x 1 watts @ 2 ohms 800 x 1 watts @ 4 ohms 0.2v - 6v adjustable input sensitivity 10 Hz - 350 Hz Frequency Response >90 dB S/N Ratio 4-Way Protection Circuit (Thermal, Overload, Speaker Short, and Over Current) Linkable to another SAZ-3000D for up to 6000 watts @ 2 ohms 35 Hz - 300 Hz adjustable 24dB Low-Pass Crossover 10 Hz - 60 Hz adjustable 24dB Subsonic Filter 0 - 180 degree adjustable phase shift 0 - 18 dB adjustable bass boost with 45 Hz center frequency Wired Remote Control unit included 300-amp external fuse required (not included) 23.4" L x 9.9" W x 2" H $1099 US Dollars - MSRP $1209 Canadian Dollars - MSRP $1349 Euros - MSRP

my budjet is $450 also will a sealed box sound better in a hatchback? what kinda music did you say u listen to?

imo saz 3000d @ 2 ohms, 1 powermaster 3100 the big three and perhaps upgread on the starting cell and you should be ok.... you may need a biger alt you may not. you will have to try it. IMO i think it will be broken or made by what you plan to do with the set up.. spl.. daily.. rap.. rock..

i have some type r alpine 5x7 comps.

thats awsome brother!

normaly cheap amps will give you the thump.

i have215 inch bl.... if you run a true 1000 on it you will be happy... but and this is big BUT is you have a weak amp.. and your just gonna clip the snot out of it.. then your will be sad.... what kinda amp do you have..

good im glad to see you have started.. its been along time coming.

vid of the noise would help.

2 8 ohms on 1 channel is 4 ohms.... so 2 sets would be 4 ohms stereo... or 16 ohms... its all in how you wire them

did you get 4 of them... or just the one trial

i just used wire for mine.. i linked them togather with 0 gauge wire... i did want the risk of anything laying or falling onto the buse bars

i know guys that just get copper strips and just dill holes where ya needem

Wouldn't be a good choice for cone. Most common custom cone choices I see are honeycomb carbon/glass combos and carbon fiber. it was a joke!.... and i did not mean wood pulpe

makem wood grain.