jonbearsmt

when shit is right... you can knock for hours on end full tilt with no issues....... the motors cool them selfs.. the amp has heat sinks... people have issues when they demand more out of there equipment then its designed for.... operator error # 1 cause of stereo failure. i promise you.

i fucking LOVE IT!!!!!!

when i say head room is key i mean.... when you want 1200 watts.. shop for 15-1700 watts

overhead is key

i used to drink alot of patron... now days i stick to the jegger.... i love it ninja

ill let someone else explain im getting muh drink on!

that amp seems to be the culprit ......... dirty dirty power.

im sure he would have no problem giving you a few decals... im more worried about WHY the sub blew...... the reason being is.. the NS v1 is a GREAT sub.. and it takes abuse like a step child...... and being you were running this sub daily i see NO reason it would have blown.. unless it has taken years of abuse already... so i have a few questions.. 1 what size amp, 2 encloser size and tuning. i have more but lets start with those... with out the pics. it kinda sounds like you heated those tensile leads up over and over untill they burned up... sure sign of clippin.. or overpowering. and a NS V1 is NEVER NEVER EVER a 65 lbs paper weight.... NEVER . and you say that again and were gonna fight!!!!!!! you pick gravel or grass!!!

looking good.. but ditch the cap.

oops/

pics of the rip?

polk countys cutest awww

wtf dude.. there is no pleasing you .

i always end up running my own wires into the locations anyway... allways going active,

the Q is a great sub too... gets very low.. you can seal it or port it. and you dont need goobs of power... or i would wait for the SA 12V2

the best way to bring a dead cell back to life is to trickle it for days... if your going to charge a battery with high amps then you need to insure its on a timer,,.... and when charging a AGM or a gell cell is to use a digital charger that is made for such batteries. they will charge at a 2 ,8 or 12 amp also chut off when charged fully, and they cycle for AGM and gell cells. you can pick one up at walmart..for cheap.. or if you have lots of money powermaster sells one thats pretty fancy

what you need to do is two things, 1 charge it... then take the charger off... leave it for 24 hours, then come back and check the voltage.. 2 after resting for 24 hours, and checking voltage.. you need to perform a load test... vatozone can do this for you , or if you have a friend with a load charger. resting voltage after sitting for 15 mins tells very little

the amp powers the LED

he sure do!!!

i like it... looks clean, videos would be sweeeeeet

when running mulitbale screens you dont want to use spliters.. video needs every bit of the voltage to display correctly .... when you y slpit it over and over you will get fuzz and lines in the picture.... you need somthing like this..... http://www.qualitymobilevideo.com/VB-1.aspx from the out put on the head unit.. to this then from this to eatch screen. you will also want to run a power wire with a relay.... i always do a 8 gauge, or 10, to a fuse pannel, eatch and everything is fused. and safe. ill have to look at see if i have pics of my video work in the black lincoln.

nah nah those suck... they have to be square to make bass.. thats proven.. my cuz has some .. he cant turn them up all the way or your face will break true story

move around then ChocolateThunda

well if you want audio to eatch screen then run the red and whites,.... if you only want video only wires the yellow..

why are you asking all these questions before you even have the unit in hand...... 1 it has directions in the box 2 its a wiring harness that is plug and play. end a into end b and run your gps antenna