jonbearsmt

ok heres the deal. i my box is sub and port same direction as of now i have them firing port up sub up. and there is around 4 inchs space before the trunk lid, and i am scoring a 148. i think i maybe able to squeeze the box in sub back port back.. but i will only have 2 or 3 inchs between the subs and port and wall of my trunk. if i change it up now.. and lose my score then im fucked for this weekend. i have talked with another town car SPL guy. and he stated, in all his testing center port back. he lost 3 DB. from having port on one side, and lost .5 db's on the dash (meca) with sub up port up i guess my short question is.. and at this point its just a guess... should i stay port up sub up .. or should i chance it and go sub back port back? with only 2 inchs the reason i would like to have sub back port back is for amp mounting.. right now its a real bitch to mount and adjust. thanks guys.

not enough info.. check your voltage at your alt, are you fused, before and after your run to the rear?.

i guess someone over at RD has been BLOWING somone over at USACI oh i speak of the D9

well fuck me right.

----RMS power, 1 ohm mono 4500W x 1CH ----RMS power, 2 ohm mono 2000W x 1CH ----RMS power, 4 ohm mono 900W x 1CH thats from sundowns website

yo Andrew whats up. your not a forum kinda guy!! welcome to SSA.

-1000 trunk. my amp is rated under 1000 watts

thanks, guys, plans, to gain as much as i can with the same set up. tight fitting,, you betcha, its just like lastnight in my trunk. but it makes it. lol thanks stefan i see loudness too.. i call it blurred vision well im a but under the weather today,.,.. yesterday i woke up at 6 am.. i was in the freezing weather for 4 hours, ( my big wreckers heater wasa not working) then worked in the cold all day on the car.. then ate dinner and then worked a 18 wheeler wreck for 5 hours in the freezing weather again ( same truck) so i woke up sick, but on a lighter note i found my beenies and face mask so that should help me thru the rest of the winter..... import face off this weekend,... my lofty goal is 149.

he has an older style lincoln our trunk is diffrent ,, just a bit.. his is bigger,... and its not an easy task to switch it around if its not right. thanks.

ok guys got some work done today... im trying to get better ready for the show this weekend. it was cold today.. when i started my ride to move it into my work spot it had 14.9 volts in the rear battery bank, soo.. was my truck this morning . and here is some work! lets make buss bars washers on the bottoms lock washers on the top! i removed all carpet, and factory sound mat, and this is how my trunk looked when i quit for the day! EWW

off to a great start here. i have been thinking about a new box design this may be my route

<kappa

glad to see you back in it brother,

how about some pics there pal,! how did your cut sheet work out?

:edit.. ill stay out of this.

good call on the second skin. looks great!

thanks everyone.... ill be throwing a birthday bonanza this weekend if you can make it your all welcome! ill make sure there are places to sleep for all!

hes in MS i used to live in vegas.

at idle, with your foot on the break and the car is grear the Rpm of the car is normaly pretty low. around 400~500 and its normal for the voltage to be lower. im not sure about on mech man unit... .and it has a tiny pully on it too.. i wouldnt think it would be that low..

get a test light and be sure you have power on the red and the yellow with the key on.. if you have power on each then do the same thing on the ground. could be an interface problem.. but also they can be confusing to install.. sure you did it correctly?

no need to mark his post negative because you dont get it....... he does things most people cant understand.. but he has passion in it.. and i respect that. i know for a fact that videos can not convey what hes feeling and seeing for him self.. its one of those things you have to experance in person.. like a pipe organ keep doing your thing man.

lol 8 12s or 1 18.

thanks guys! im working this weekend as it has been raining for the last 4 days.. so no party this weekend.. but its going down next weekend, thanks again guys

shielded is just that,,, the motor is shielded so that you can have then close to a tv or a monitor the specs will speak tell the tail on the speaker..

nice