iceteebone

i'm not looking to rattle dishes in the kitchen, just add some bass and lows to my HT. i'll probably go for the ported.

i'm gonna be feeding each of my 12" rl-p's about 1200 watts rms a pice and want to build a sealed box. i'm thinking 1 cube each will work well. what do you guys think?

i know they can get loud. i used to have them ported in my jeep run off a pg tantrum 1200.1. now i have a car and want a smaller box.

i can do 1.1 cubes (that is after the driver displacement) and then add a pound or 2 of polyfill to each chamber?

what if i made it 1 cube per sub and added polyfill? i would really like to gain as much room as possible in my trunk.

i'm gonna be running 2 batteries but i'm not sure what isolator to get. my setup is an orion 2500D and a pg ti500.4 with a 200 amp alt. and big 3 done in 1/0 guage wire. i have just a stock battery under the hood and plan to run a small yellowtop in the back, but i don't know what isolator to use and where to get one. i found this one here: http://www.darvex.com/miva/merchant...duct_Code=SR200 is that one any good or can i get another/or better one somewhere else?

it was a stinger sr200. maybe this link will work http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...797023&rd=1&ssP

i was wondering what the limit is, power wise, of these subs. the website says anywhere from 300-1200. i picked up an orion 2500D and planned to power 2 12" rl-p's with it. my box is 3.6 cubes tuned to 32 hz. i'm starting to be concerned as to wether or not these subs will be able to handle this power. i'll make sure to set my gains properly and subsonic filter and all that good stuff.

i already own the subs and they are dual 4 ohm and i plan to run them at 1 ohm. i've fed them 700 watts rms and they seem to handle that with incredible ease so my thinking was they could handle 1200 watts +, but i just wanted to make sure.

i picked up a pg tantrum 1200.1 for a great price. it was benched at 1494 @ 4 ohms. hope to have it installed by the end of the week.

i'm looking for a new amp for my 12" magnum about 1200 wrms @1 ohm and wanted to hear your guys suggestions. i have a stock electrical system so i want something that makes rated power at like 13 volts instead of 14.5 volts and doesn't strain my electrical system. the most i want to spend is like $350. an amp i have in mind is the elemental designs nine.1, but i'm leary with what i have been hearing about ED. i also have been considering the cadence z1200. i know it's asking a lot but please help me choose. thanks

is $265 a good price for a used z1200? i'm also considering the elemental designs nine.1. haven't heard anything negative about the amp. i've read it does something like 1500 watts at 1 ohm at only 13.7 volts which is exactly what my electrical system produces. i've read though the bashing about ed's customer service but i've never had a problem with them. should i give this ed amp or try or maybe get the cadence or the refurbed viper?

what do you guys think about a cadence z1200?

how do you like that viper on the magnum? i'm thinking about getting that viper at ikesound but i'm not sure yet.

what about a pheonix gold xenon 1200.1? it says 1200 watt rms from 1-4 ohms and 80% efficiency. i heard good things about the tantrums and how underrated they were, but how do these amps stack up? i found a really good price on one and i'm thinking about buying it.

do you guys think this is a good deal? http://ikesound.com/product-product_id/2424 i found someone else on here who powers there magnum with a viper 1200.1 and said he really liked it.

i found a refurbed viper 1200.1 for like 2 something at ikesound. would that push it pretty good?

it will also cost more than i want to spend. also i am curious as to why an amp putting out 1200 watts at 4 ohms would be better than one at 1 ohm? also i am currently running a hifonics brutus 1000D and my electrical system is handling it perfectly. i am looking to upgrade because that hifonics just isn't pushing the magnum.

i was thinking of getting an orion 1200D. i also was thinking of the jbl 1200.1 or a directed 1500D

my box is 2.5 cubes after displacement tuned to 30 hz. and i am powering it with a hifonics BX1000D and i think it sounds great. good LSQ in my opinion.

i've been running my magnums sealed for awhile now i feel it's time for a ported box. SI recommends 1.5 cubes per sub tuned to 32 hz. my question is doesn't anybody have there subs in this type of enclosure and how does it sound? or will it sound better in a different size/tuned box?

i want a slot port. height say probably no more than 24" and depth no more than 30"

i got 2 12's with a pg tantrum 1200.1 to power them. i'm running them sealed and would like to go to ported. i want to go for LSQ but a little more on the spl side. i totally suck at designing ports. if someone can come up with some measurements or a design i would really really really appreciate it.

it's going in a 95 jeep grand cherokee so size isn't really a problem since i have the entire back end i can use. i only want to keep it no more than 35" wide.