TRZ

Let me know when the 10's will be ready

10" is very nice

76

Try a Audison bit one now that thing is by far superior it has some really unbelievable features.

They are pretty good in med sized ported enclosures with moderate power , we installed a pair in a older cutlass with a 4kw mojo and it hammers pretty good . There were two DD 9515 in the car prior to the z"s and the customer is much happier now . He has been beating on them now for about 2-3 months. They are very musical and have good control even when played loud. I would say that if someone bought a pair and threw them on a 2000saz or 1500 saz they would be pretty impressed to say the least especially in a well constructed enclosure ,and it would not kill the budget ether

Tarheels Auto Sound Challenge # 3 Sunday May 17th all classes spl/sq/dbspl registration starts at 9:00 AM and closes at 1:00PM. This is a MECA 2x point event . We would also like to welcome NSCSPL to the event as they will also be hosting a show as well. That's right we will be holding TWO shows at once. Hope to see you there.

I love the Zs.. x2

Tarheels Auto Sound Challenge # 3 Sunday May 17th all classes spl/sq/dbspl registration starts at 9:00 AM and closes at 1:00PM. This is a MECA 2x point event . We would also like to welcome NSCSPL to the event as they will also be hosting a show as well. That's right we will be holding TWO shows at once. Hope to see you there.

Should be larger than normal crowd. Also Dave Edwards (Hybrid Tech) will be judging the sq portion of the event.

Tarheels Auto Sound challenge # 2 This is a 2X MECA points event. Reg opens at 9:00 am and closes 1:00pm SPL ,SQ , Drive by and rta freq. The location is Tremorz Auto Sound located at 1124 N Barkley rd. Statesville NC. (704) 883-8428 http://www.mecacaraudio.com/flyers/4-19-09NCv2.pdf

Hows the xcons

Hope to see you there, should be good show.

If you have a way to get a term lab or even an ac ,try a sweep from 20 to 100hz and see were your peak freq is.some shops only charge around $20.00 to use term for 20-30 min (money well spent) this will allow you to play with you placement and filters on your amps to get the most out of your system as it is. Also if you have a dmm and an ac clamp. Play your peak freq and Clamp the positive wire(s) going from your amp to your box and set the clamp on ac (A) then set your dmm to ac (V) and put the red prob on the + of the amp and the black to the neg of the amp . make note of the numbers .Take the numbers you came up with and use this formula: volts divided by amps=rise (ohms).That will be the rise the amp is seeing, it will give you a way of figuring out what problems you have or at least a starting point. Also make sure the subs are wired correctly and test that they are wired correctly (compression and refraction)and make sure you are not overlapping your filters on the amp as well.

Get up with me .....im here just chillin .. Were you stayin , I am at the plaza resort and spa about 2 blocks from ocean center beach side , weather suppose to be great all weekend. some dude got his stuff jacked they said it was a escalade w/ 150,000 price tag.They came to were the dude was stayin and barged in the door and boosted his sht @ gun point and then got chased by pd at which point they wrecked the truck(totaled it) he was from sc it was a red custom painted candy red escalade on 30" ( anyone know who it was from sc ,poor dude ) he was here for sbn .pack heat daytona is pretty tough in some areas I lived here for like 6-7 years, stay off orange ave between ridgewood ave and nova road. bad,bad like watts sht. Surprisingly were they boosted his truck was on beachside in a pretty good area of ormond beach (ormond by the sea)about 2 streets from were i use to live. That chit was set up had to be. anyways hit me back and let me know were your stayin .are you going to saturday night party for bass boxing. One last thing if your lookin for a good club the oceandeck is pretty good near the boardwalk it is directly on the beach and play live music like reggie and a mix of dance it's were alot of locals go ,also bank and blues on main street just off a1a is pretty good.hola

I'm here 5:00pm Thursday ,ready for sbn

I'll be there

Jake can find a outlet for doa and repairs , I have a funny felling its not to much of a problem

Jacob sells amps back to china and korea, So lets say he builds 10 1 watt amps @ a cost of $0.50 per amp ($5.00) imported. and sells 8 of the ten amps back to china or korea @$1.00 ($8.00)this means he brought $3.00 extra dollars back to America to respend back into our economy by sponsoring meca or giving discounts to team members or running sales . Just thinking outside the box for what its worth

listen that there are differences? because they arrived here in Italy. then you understand me ............. ?

Donated direct , god bless and hope it helps

FO SHIZZLE

sometimes a relay will help, just asking is your H/U a pioneer? is your processor turning on before or after your amps? use this as a reference to wire the relay 87 12v (constant) 86 to ground 85 from H/U or source unit 30 to all your amps remote input (turn on) 87a not used

Nice set up ,yea Jake and Brandon @ Sundown are great with pr and customer service.A lot of exciting stuff is coming to help expand the sundown family of end users ,can't wait.

Its not photo shop , the amount of joules has caused a worm hole around it