yjbliz

302 plz your going to give the ford guys a stroke

go to autozone or home depot and get some never-dull for $5 and about 20min.and you can buff them out yourself

sorry but a stock 5.0 block will only make 500rwhp after that you get a taco by a taco i mean it cracks the block in half been there done that i have a 93 hatch 680rwhp and have had 13 5.0's in the last 5 or 6 years all 93 to 87 if you whant a little more power put a short belt ( bypass smog pump) $30 bucks (2) headers shortys around $250 installed (3)upper and lower intake around $400 installed (used) (3) bump the timming to 13 deg. free and you will be happy

sorry but a stock 5.0 block will only make 500rwhp after that you get a taco by a taco i mean it cracks the block in half been there done that i have a 93 hatch 680rwhp and have had 13 5.0's in the last 5 or 6 years all 93 to 87

the mmatt D3500.5 is 0.5ohm stable and has a warranty and will play all day.... I never used a lanzar............ so idont know how the mmatts and lanzar stack up

what do you have now in there

a fully loaded btl 18 is about 70 pounds hope you guys in turkey use the metric system ............i dont know how that 1 stone , 2 stones system works

just redo them, ...... at the end of the day your set up is only as good as your biuld

wow very informative answers a few questions............nice piece

scott i have 3 18's but 1 only has 1(the other 2 are fine) of the voice coils that works, there d1 coils what should i do

what will that tune the box too?

ok here goes we have the box made (except for the ports) it's 19.3 cuft after dis. for subs(3 18 btl fully loaded)and bracing, i still need to make the ports........just to give you guys an idea first i cant make just 1 large slot port would have to be 3 at most (med. size ports)and i would like to tune it around 33-35hz oh and the ports would be facing the same way as the subs it's somewhat of a wall/slant design any help would be highly appricated ............................. thanks ahead of time...........................

can anyone help me out

should hit very crisp and clean in the sealed pods like that.....almost looks like a factory option

are those o/s ppi pro 12's (very nice set-up)

ok i had 2 mmats 3500.5 but those where lost(plz dont ask I still what to kill the wife) so i need to get 3 amps for 3 d1 btl 18 fully loaded but stay under 2100 bucks for all 3 to my door any ideas

i had the 3500.5 and 2100.1 both of them where awsome amps but have heard that its a luck of the draw whith the digital amp's (the one that has the flip top) but the older ones you can use as a hammer and they still keep playing(thats what ive been told never used them)

after losing the mmats hell even when i had them i realy wanted to try the sundowns..

so even if get the amps installed by a sundown dealer no warranty (that sux) if there run at .5ohm? as for elec. i have a powermaster alt /2-1800's(up front)/5-2400's (in the back) what more would i need to run the 3000's

denim sundownz test was run at .6ohm whith a 1.something rise i think. is it that 1/2ohm's not recomended for daily

what kind of car

my buget just whent up from $2100 to $2500 does anyone have any ideas what i can get and where

no biggie

ok what dd sub is he running since its that easy to tell, im just a noob sorry im not that good

what subs are you pushing whith the 1500d