Quentin Jarrell

Yea I can't remember the guys name for nothing. He's the one that built that big ass 25K RF amp. Anyway, he modified the inputs on the 2500's to handle the voltage. The RF Hummer was actually based on the set up in my car. It would play in mid 60's on music with the doors open. They got like 4 or 5 noise violations that year at CES that year. It had a termlab built in the dash.

Fakuda rep for any of y'all home stuff? He's upper management so he might not get out much anymore.

Whatever the equivilant BD series was. If I recall it was the first year they came out with the black piano finish. Mark Fukuda helped me design a wall in a mustang for 12 T2 12's on 12 bd 2500's and a bd 500 as a line driver.

I know back around 2005 those amps could be had for like $200

RF has a pretty sweet employee program. I know I'd definatly use their product.

Y not its good properly designed product.

Can't see the vid as I'm mobile. But I assume the ssf is turned off.

Model the subs. You have a flatter responce at lower volume. Larger the volume with the same tuning will result in a ripple around tuning then turning saddle shaped up to the cut off frequency of the sub. If you want more output. Go up to the largest box that will fit while keeping ripple no more than 3db and keeping delay less than 28 m/s below ~30 hertz.

She must be one crazy bitch 3 years is a long time.

Your ex as in Daniele?

I've also got a N3 motor that I'd let go for cheap.

Like this? That's one sexy rifle!http://www.impactguns.com/dpms-ar-15-243-20-inch-heavy-barrel-19rd-mags-lr-243-884451000280.aspx Well yea, you will find that all manufacturers will put their own flare on the AR frame. Kinda like ford or Chevy. It's whatever tickles your fancy. But if course some are built better than others just like anything else.

If you don't already have it I HIGHLY recommend doing a hunter safety course.

Now if I wanted the cool factor this in subsonic suppressed would be one of my top choices. http://mcmillanusa.com/mcmillan-rifles-alias-cs5.php

If that's all then I would personally get one in 243 as it is still a popular enough round that it is cheap and easily avaliable since a lot people use it for white tail and I doubt the 223 has the knock down power the 243 has out to 100-150 yards (could be wrong) and since most people are getting 223 I'd assume the rounds are harder and more expensive to buy, I'd check the market first.

It sounds like you just want a military gun that looks cool and that's fine I understand that but if you are really looking to shoot a lot and are going to be shooting only varmit I'd do a 22 AR as bullets will be 10 times cheaper.

I do t think you fully understand what an AR is. It is not a caliber. It is a type of chassis. Just like an SUV is a type of vehicle. Yes, there is a 22 AR. Colt makes one as well as others. It makes no sense using a big game round on a raccoon or possum. It's akind to using a 50 cal on a white tail.

no that tastes like shit too. If used at all, people will use Tony Chachere's or Zataran's for quick seasoning similar to adding salt and pepper. However any real cooking especially from scratch raw ingredients would be used. Now when it comes to boiling seafood we normally use Zataran's crab boil as it's just easier and the taste really can't be beat. You can bet that anything being boiled weather it be corn, crawfish, crabs, or potatoes it's gonna be boiled in Zataran's crab boil. We go to the florida keys every August for Lobster season and about the best thing on earth is lobster boiled in crab boil.

you'd be good with a 22 magnum or a .17 cal I use Hornady v-max http://www.hornady.com/store/searchammo.php?mode=search&main_cat=250&categoryid%5B%5D=259&categoryid%5B%5D=&categoryid%5B%5D=375&x=30&y=8

Oh helllllllll no!!!! Old bay is for people not from Louisiana that don't know what flavor is. The only thing in that pot is water, crabs, and shrimp heads and tails. No seasoning, that goes into the roux with the .veggies

No, 1/0 copper and 1/0 aluminum. Wire is sized based on voltage loss over a given length not the physical OD. properly sized 1/0 aluminum will always be bigger than 1/0 copper since of course copper is more conductive. However it is still 1/0. Therefore if you can find properly sized 1/0 aluminum wire it will be no different than properly sized 1/0 copper.

Making some gumbo stock.

no they will direct sales only. I'm trying my damnedest to keep the 12" at $290 plus shipping

about 65 poundsJesus, that's more than my zcon and evil It takes a good bit of motor force to move 350 gram 12 inch piston assembly 33mm one way in a 1.25 (yes 1.25 cubic foot) down to 27 hertz with a flat response curve.

We just have to be 1,000 feet from a house or public structure.