Quentin Jarrell

http://www.carstereo.com/help/Articles.cfm?id=31 Use 25mm as xmax

Today was about 85 with 90% humidity. Normally in August it'll be 95-100 with 95-100% humidity. A/C stays at 72 around here

The Mirai gonna be picked on Monday!!!!!!!!!!!!!!!!!!!!!!!

Once you get a build log going I can help you through the process.

Follow the pics I posted. You will only need 4 layers of 2 ounce mat. It'll be about 3/16 thick.

Sure you already know this but, route the mounting holes on the back side of the baffle.

50mm of course but what about a cheaper lens than the high end canon prime, You don't need and really won't see the benefits from the high end so why get it first when you can drop so much less money to get your goal. http://www.amazon.com/Canon-50mm-1-8-Camera-Lens/dp/B00007E7JU I am waffling on the 1/4 or 1/2.right now I have have so many shots wrecked because of lower light. So I could benefit from either. If you do start pixel peeping, the 1/2 and 1/4 are really close. The build quality of the 1/8 is really bad, and is extremely hard to use. The focus ring is a bitch. I may not have such a hard time with using the 1/4. But I got to use the 1/2 and even not knowing too much about photography it is built better. Other solution is get a better body and bump that ISO up to combat the low light. The canon doesn't have an auto ISO feature?

The suspension and BL products are within .1mm which is uncommon among most product. It just goes to show the design effort put into the driver. It has an xmax rating of 21.9mm at 20% distortion which is the standard rating. (20% distortion is inaudible)

No I'm sorry they are under 200 http://www.parts-express.com/pe/showdetl.cfm?partnumber=295-512

Those or an upgrade. The Dayton Ultimax. Vance did testing and a review on the 12 inch model. It's nearly a perfectly designed driver. Every component is almost perfectly matched. I think parts express has them for around $300-350

See below. It's impossible to properly connect the two air spaces. http://www.soundsolutionsaudio.com/forum/topic/59530-newb-system-advice-subs-and-amp/#entry1001198

So they can fit under the seat so people don't think you have an audio systemYou obviously do not know what the floor pan looks like under a 4 door dodge.

This is going in a dodge truck. There are only so many options that will work correctly. And two tens is the best option.

Don't know how accurate these two different manufactures graphs are but they appear to be the same info. Looks like the difference at 75c for 1/0 is 30 amps? So aluminum would need to be priced at ~77 cents on the dollar to make it comparable to copper? http://cerrowire.com/ampacity-charts http://www.allenelectric.com/referencedata/ampacity.htm

They would have to be at an extremely good price for me to buy them. I'm partial to Incriminator but I'm not sure if they have any lower models in stock or sundown audio would be just as good. If their Sa model is shallow enough they would be a good option. Fi and SSA are good options also as long as you don't mind waiting 1 1/2 months to receive the product.

Yes it is misinformation. You don't set gains with an occiliscope, especially a class D amp. And you will not hear a sub that is recieving a clipped signal unless its an incredibly clipped signal. Sub frequency distortions are not audible until 20% distortion.

The last one I did was with two IA i87 10's ported and it sounded pretty damn good.

You can fit two 10's ported. The sa 8 will not fit its too deep (90% sure). You can fit a rectangular box back there all you have to do is remove the vents on the back wall and cover them with deadener or aluminum duct tape.

I ran analysis on some whey I bought around a year ago and it was pretty good. Protien content was right around 85-86%, moisture content was like 13%. The remaing must be some type of stabilizer. The solubility was over 90 percent but I don't recall the exact number. I've got all the results at the house. Also no mycotoxins, heavy metals or radiation was found.

I use blue cross and have their Blue Max plan. It's about 245 a month and is not expected to increase any more than normal.

Your just an arseho magnet. 1st true then ur ole lady now him.

Ripple is a ripple or wave in the responce. A positive ripple will provide more output.

No reread the second paragraph.

Ill have to look for some. That was before the digital age.