Quentin Jarrell

$$$$$$

seat re-installed to check fitment.

I'm gonna search around. If I can find a 5 inch and a tweeter that I can fit keeping my entire front stage on the dash I'd like to go that route. If not I'll go smaller and if need be I have about 1/2 cubic foot in the doors for extra midbass.

added a backer to the beauty panel.

SQ GURUS LOOK AT MY PILLARS http://www.soundsolutionsaudio.com/forum/topic/59650-2010-civic-sedan-daily-drive/page-3#entry1025101

Thinking about what I'm gonna do about the front stage and realize I have some pretty damn big A-pillars. The sandpaper is 5" OD. I won't have a bit of problem physically mounting a 5 inch driver on axis on both driver and passenger sides. In the "window" area I have ~.05 cubic feet but can push the enclosure into the dash and get a good .25 cubic foot gross. I'll have ~3.5 inches mounting depth without it looking too gaudy. Driver is ~35 inches, and passenger ~50 inches from headrest. Drivers would sit at neck level at my seating position.

30 min or so

possibly, if not we will be in my ole lady's '13 civic. As of right now I am scheduled to work Sunday night. However the vessel may not arrive until later in the week. I'll know more tomorrow night.

I'm hoping to have it all finished around xmas. Still deciding on front stage

~24 hertz should have and F3 of ~20 hertz. Kinda iffy due to all the port angles but it'll be close enough.

.

Please explain. You said "small install". I would like to know what the hell a "big install" is to you Q? This I would consider a big install. When it was finished it had about 2,000 hrs in it.

drawing? you mean the first pic? That is just a black and white photo of the ole lady. The sculpture below was made from plaster casts from her.

per Vance Dickason adding stuffing can: 15% - 25% i volume increase efficiency as much as 15% potentially change moving mass of the system decreasing system efficiency damping losses reduce coloration due to reflections in an enclosure He spends 6 pages on the subject. You basically use formulas to calculate Q, then add or remove stuffing and recalculate.

oh hell no

Stuffing is used to adjust Q. Stuffing just to stuff is not correct procedure.

Here's a better one. The kids around here are selling 1 $ cast bars. But they don't have them on hand. You must order them and then the school wants the kids to track you down for your one dollar piece if candy when they come in.

Viper has lifetime warranty on their brains. Call them about the situation and they will pay for it to be fixed.

I got enough problems finishing my own vehicles let alone some one else's

.

Wasn't aware that you had to be old to drive a Benz Can't tell you how many BM'er and Porsche sales people have told me that I am too young for my car. Of course I think, oh, nice pucking sales process moron....although in general I agree on a personal level.That being said, I am not old enough to have kids yet, or a professional job. etc. Not old enough to have kids? Aren't you in your 30s?Or do you mean that's the salesman saucing you up? 30's? He's old enough to be most members grandpa.