Quentin Jarrell

When did they switch the Bette from Mg to Al ?

Just because it has been annealed doesn't mean it hasn't been treated with electricity to reduce oxygen content.

There is a fabric jacket between the wire and rubber jacket. It is purposely designed to slide. You have to remember this stuff is made for welders where the lead may be 4 or 500 feet long. Allowing the cable to slide in the jacket makes it much easier to maneuver.

Yep. That's what I use.

Yea not much up yet. Waiting on product to take pics.

It won't. Go to Vance Dickason's website. He has an option on the site to sigh up for free software. The software is in excel and is designed by Patrick Turnmire. All you do is type in basic specs and it will calculate more specific specs and has options for sealed and ported boxes. It will also calculate the rms power for the driver to hit Xmax in your entered enclosure. There are also crossover calculators and a spreadsheet that gives cabin gain per your entered room info.

Share this on facebook so your competitor friends can get in on the deal before time runs out. https://www.facebook.com/directspeakersupplies

.

you've got way too many clean older rides around you. When I get ready I'm gonna have to get with you and see what's in your area. I've been leaning to wards a mid 80's single cab chevy with 4 or 6 15's.

I've always been a sucker for a clean dually

might possibly have all my parts in next week and will be working on getting all the speaker parts on line. You will also be able to purchase the Ethos drivers directly from the store. As of now I have coming: cones for 10, 12, 15, 18, baskets for 12 and 15 allen head bolts for attaching basket to motor (no more cheap screw heads that are impossible to remove) spiders- 8 inch progressive, 3 different compliances and a stiff spider with 100 amp rated leads coils- 4 layer aluminum same as used on the Ethos 8 gauge spring terminals to fit baskets 10, 12, 15, 18 inch wrap around gaskets DSS 6 inch dust caps black ca glue for attaching spider to basket, former joints and dust caps accelerator for ca glue rubberized glue for attaching surrounds to basket solder and flux

yea buddy

Link for last video

threw the 12 in a test box on a Kicker 500 at 4 ohms and I think I'm going to be more than satisfied for a DD. I don't think I'll crank the bass knob up much with proper power. This measly 250 watts is enough to get a little windshield flex.

No reps for DSS. Direct sales only.

turn the volume up you can hear the target clink

i'd look into the 300 mag

Not too shabby for a couple $355 subs SHIPPED

.................................

enclosure for (4)15's 3 cubic feet per sub tuned to 32 hertz external dimensions: 46" wide x 40" deep x 19" tall

.

Any time to put this on a TL or better yet some vids?

......