Quentin Jarrell

Only is they are boiled in crab boil. None of that steamed shit down here. If you had bigger crabs....Dungenous (sp?). And go to the Florida keys every August for lobster season. Eat several warm water lobsters a month boiled in crab boil. I needs a little flavor in my food.

They have a few casinos in the Biloxi Ms area that have some decent crab legs on their buffet. Definable worth the 25 bucks.

Only is they are boiled in crab boil. None of that steamed shit down here.

The sub stage in this one is just a basic single 15 ported box wrapped in carpet and bolted to the bed of the truck. The foldable panel will be removed via the few bolts that hold the hinge to the floor. A wooden panel will be made to go in its place with a woofer cutout to match up to the cut out in the box. Then the sub will be mounted to both the panel and enclosure. This will leave a few inches between the rear of the seat and the sub.

In an avalanche? Both subs and port forward. I'm gonna be doing a very basic instal in ine this weekend. I'll post pics to give you an idea.

Two 15 inch Ethos 32 wide x 38 deep x 18 tall tuned to 32 hertz

The 1,800 watt rating is not a thermal rating. It is the rms power needed to drive them to Xmax (32.5 mm) in a 3 cft box tuned to 32 hertz. As with any sub/box combination this will vary. However this is the median rating needed for the recommended enclosures. If you were to use 5500 watts on 4 then you can expect the drivers to reach ~25mm one way. So 4 x 25mm = 100mm 3 x 32.5mm = 97.5mm This is IF you can get the full 5,500 watts with an odd ohm load with the three subs.

I've got a voice coil issue on a headphone siminar around here somewhere. If I can find it I'll scan and upload it.

Keep her goin man!!! The thoughts and prayers are continuing!!! J My ole lady as some of you might know is deaf and has always had vertigo issues due to inner ear problems. And pressure caused by exertion will make her dizzy. C-section will be the only option for her as she will not be able to push. The Dr actually said a c-section is actually better for the baby.

I've been a dealer for IA for nearly six years and have not had a lick of problem or returns on any of them. I currently have a buddy running 3 20.1's that are mounted on th box and have had no issues. The amps have very strick protection circuits and will make the amps shut off if you get much below one ohm. I have ran burps on two strapped at one ohm repeatedly and they have protected and still work fine. This is to keep you from letting them go up in smoke. Nick Wright owner of IA is also my OEM supplier and I do/will run all IA amps in my personal demo vehicles. Unlike some smaller underground companies Nick actually has a lot if input in the design of his amps. And unlik other Korean made amps that go to one factory to piece together amps he actualy has 4 or 5 contacts to find, select, and utalize the best components to his liking. Besides the product being top notch the customer survive is also excellent. I deal with them on a weekly basis and Tricia, the receptionist/order handler normal always answers phone messages within 24hr if not within a few minutes depending on their workload.

anyone familiar with the Vixia HF G20. Looking for a camcorder

The only pans I cook in are cast iron. The only pots I cook in are copper.

.

That doesn't mean squat to me. What if they had it serviced at an independent place? They don't report to carfax. Also, look at the tires and alignments on owner 1. Something is wrong with that truck. tires were changed on 11th and 3rd month. maybe just swapping out winter tires?

.

.

below is the sample and is not final production. You will see when modeled a dip or saddle in response in the 40-60 ish range when modeled in the recommended 1.5 tuned ~32. This has been addressed and why I'm awaiting final parameters. re 1.5 qms 9.48 qes .36 fs 28.8 mms 347.6 grams cms .09 mm/n B/L 16.95 vas 29.926 L sd 490.87 cm^2 spl 85.3

still working on finalizing as I'm waiting on final large signal parameters. They will be 1.5 cubic feet tuned ~32 hertz. I won't be able to give final specs until. However I have sample parameters which are as followed. These are in the ball park but I added mass to the cone and adjusted the spider pack a bit. well I don't have a Klippel viewer on this computer give me about 30 minutes while I download one

.

Need to add a catipa or whatever the funky little word needed to type in to become a member and add a question like "what's 1 + 1" in order to become a member.

You've got to give me an idea of what you are looking to do as far as asthetics. And refresh me on outter dimensions.

There was spam after your post. Spam has been randomly neg'ing posts. I more than likely deleted the spam before anyone caught it.

So yep. United had a cart waiting for us and still missed the flight. Sleeping in a raggedy ass marriott airport room tonight.

The cab driver was so so sorry. That had never happened to him before. It was his first day. He went through an intersection taking a left turn crossed a median. Made a unturn about 300 feet hit a phone company truck in the turning lane then proceeded to cross the medium a second time.