Quentin Jarrell

Too much power. The only way to burn a sub up.

It's just plum retarded. The ole lady just asks if THAT"S really necessary and keeps shaking her head. And she has see a few builds in her day.

.

To give a better idea of the size of this driver. The Magnetar 15 next to a 10 inch SSA Dcon.

Layed it on my back seat and free aired it on a little 500 watt amp. Going to have to do some some in box testing with some power on a term lab to see if I'll offer the SPL coil. This thing has a TON of motor force. On only 500 watts it's moving ~15mm one way. The Ethos barely moves on this much power. The suspension on this sample takes 2,190 grams to move it 1mm one way. The suspension on the Ethos takes 1,195 grams to move it 1mm and the Sample's moving mass is almost 3 times more. The fact that it moves this much shows is motor force to moving mass ratio is pretty damn good.

Had to resort to SMD.

I've got plenty on my chest, thighs, and lats. And scars on my hips and under arms from suits cutting in to me. It very common for suits to cut. If not they are too loose. I've gained and lost nearly 25% of my body weight in muscle mass. The ole ladies OB told her all those creams and stuff don't work. I'd assume a dr that's felt with a few thousand pregnant woman would be right.

MMAG stands for multiple magnetic air gap. As long as a transducer has more than one air gap (no mater the number) and uses what STEP calls a "diode magnet" between the gaps it falls under the MMAG patent. The "Trident" I posted a while back is just a 3 gap iteration of MMAG

I think with an ass that fat, it won't fit with that depth. I'll measure though.The motor OD is 11 inches

4 12 inch subs 7.25 cubic feet net 257 square inches of port area tuned to 32 hertz

Not quite sure yet exactly. Depends on pricing and other stuff. Will be Korean built. Mono blocks under 2k, a 4 channel. If pricing is reasonable all amps will be full range with available external DSP. Depending on their workload I plan on Enrique and Pat to design some Low reluctance MMAG highs tweeters and Vance will be doing the crossover networks. Time frame will be dependent on their workload. But first I have to get them to design some soft parts for a 15 that'll handle 65mm one way throw. I have a lot planned just have to see what can be done in the time allowed.

C

.

If all is well I would have to do a preorder group buy of 50 units to have production run this year. I already this years budget allotted for two smaller sub lines, components, and amplifiers. Just a rough guesstimate IF I did a pre order and that's a big if price would be ~$700 shipped. I'm guesstimating this to be in the $1,000-1,100 MAP shipped.

I'm not home to verify...but mounting depth should be 10 1/2 inches.

This sample is a 15 version with the SPL coil. The distance from the top of the top top plate to the bottom of the bottom top plate is 75mm (~3"). The coil overhanges above and below that distance 10mm. Think of it at an overhung sub with a 3 inch thick top plate in this configuration.

Anyone wanna see a picture?

I have a few in stock. I'm out if town but can ship one next week. They are matte black if that matters.