Quentin Jarrell

It's the new coil for the next order of Ethos. The windings are the same the color is just the coil bonder used. It has (6) 1/4 vent holes in the former to increase cooling and reduce back pressure under the cap. This set up has dual leads and one extra spider for those who are running tons of power for short periods of time.

The Ethos in a 1.75 enclosure will move 30mm one way on 1,510 watts and 27mm one way on 1,220 watts

Within 7 business days

Your box is a bit bigger than the recommended. Give me a few hours and I'll calculate how much power you will need to hit Xmax in 1.75 cft.Sent an email through the DSS site last week. Maybe it didnt go through. But regarding the box, the new one was never built. If I can use the same plan without paying for a new one, great. If not, it's not a big deal.Your the second person to tell me emails aren't going through. Guess I need to check it out. The bigger the box the less power you will need to hit Xmax. I can calculate how far the cone will move on your amp in the 1.75 cft box.

Your box is a bit bigger than the recommended. Give me a few hours and I'll calculate how much power you will need to hit Xmax in 1.75 cft.

Uh Oh.......

No more than 7 business days

http://directsoundsolutions.com/ You can purchase off the site. I have a hand few left and a few with minor cosmetic issues like scratches on the top and bottom plates. I'd let those go for $50 off each. If you don't mind the scratches (baskets and soft parts will be new and pristine) create an account on the site and I will give you a $100 store credit. ..does this apply to 15's aswell? Yea they use the same motor. I'll give you a $50 credit on each of whatever size you like.

pretty bad when you gotta sell your clubs bc they wont fit bc of your sound

I still can't get over how these shops really don't have a clue what real bass is. Maybe its time to launch Pinnacle Transducers?

http://directsoundsolutions.com/ You can purchase off the site. I have a hand few left and a few with minor cosmetic issues like scratches on the top and bottom plates. I'd let those go for $50 off each. If you don't mind the scratches (baskets and soft parts will be new and pristine) create an account on the site and I will give you a $100 store credit.

Just call it breast meat

18 1/2 million cubic yards of dirt. Gonna be a nice size building.

That'll work. I have 4 or 5 left for purchase.

Stick with your original design. You won't net an audible difference with the new design.

What was the trophy for?

1

Looks good

Yes build time is running 3-7 business days.

Won't be a problem at all. You will just get slightly less boost at tuning.

Yep, they have been designed with FEA modeling and Klippeled to ensure great transient response throughout the passband.

When modeling don't use the 32.5mm Xmax figure. The correct definition of Xmax is coil over hang which is 23.5mm.

Tell her she won't be able to see it...from the driver's seat

The recommended port area is per Richard Small's minimum port area to minimize port compression. Using less port area will not alter "sq" unless it's so small you can hear it chuff.

(2) 15's, 2 cft net per driver