menikmati

There's no way a pound can fit in a cube loosely, guess I'll just use less, thanks.

Sorry to bring this back up, but I just want to stay on the safe side. I'm running two subs in 1.1 sealed each, separate chambers. I stuffed each chamber with approx 14oz of polyfill, but it seems like a lot. Is just stuffing the box okay? It filled up most of the chamber. I keep hearing that the subwoofer can be damaged if polyfill is just stuffed in, is there a different way I should have put in the polyfill? Thank you.

52 sq. inches he says.

Ah, guess I forgot to mention. 2 12"

Hi, I currently have the SSD's w/ copper coil in about a cube sealed. My buddy had a box, 3.5 @ 32hz I believe, that he said I could use if I needed. Would that box be good for the SSD's or will it be too small? I could use the slight bump in output, unless the box is too small.

Okay.. let's say there isn't a technicality of one driver being out of production....

Wanted to get some opinions out there.. Which would you guys go with, 2 12w6v2's sealed or 1 12 Magnum ported? Either application would be powered by a Sundown 1500d. Looking for SQ and have decent output.

Yeah, I've got about 2 good layers of Damplfier on the inner skin of my door panel, and 2 layers on the outer panel. The doors are also pretty much sealed up. The midbass is really live and peppy rather than full and powerful.

I have some CMX's right now, getting some Germaniums installed sometime next week, so we'll see if that makes a difference. Doubt it will, but we'll see. There's just a bit more impact in that frequency range with previous setups I've had. I simply said I'm not an SQ-freak in response to NDMstang's post saying that if that that big into SQ I shouldn't be running amps that low. I'm not that big into SQ. As for your confusion, I guess if my system right now had slightly more output around 45-65hz, then it'd probably have a flatter response also. So I thought that in my application a flatter response and better response from that frequency range would go hand in hand, therefore that might be the reason you got two different vibes. Hopefully that'll help you help me.. heh, sorry for coming so harsh the first time, my bad.

Probably because of my trunk car. 1998 Passat, not exactly an output type of vehicle. I've heard same exact setups in my car and someone elses, my cabin is just hard to get loud. I only have a single Q, running two sealed might not be favorable for my electrical system if I wanna run them at .5 ohms (the Q I have is D2). Probably just gonna look at 2 SSD's w/ copper coil sometime in the future.

Honestly, the question wasn't that complicated. I'd email Scott, but even then I'd have to try at least 4-5 times to get one response. And I still need to pick a bone about being confused. Seriously, you've heard the SSD, you've heard the Q, and in a box close to my specs at that. So I'm sure you could answer the question if you'd please, but you decide to let people know you're confused. Thanks.

Yeah, confused so you decide to post and tell people instead of trying to help. But of course RIckRolled, you're better than everyone else. I really don't see what there is confusion about, people don't know how to read. I simply just asked if 2 12" sealed SSD's with the copper coil would keep up with the accuracy and the low-end of the Q (2.2 @ 32) and have slightly more output in the 45-65hz range. Basically a flatter response.

I'd say around 350, the SSD's are almost pushin it. Add a sealed 15" Magnum to the mix too.

Hey Scott, my friend has a Sundown SAE-1000d (1000 x 1 @ 1 ohm) for power and I'm trying to figure out what subs to get. He's running 2 12w3v2's sealed and they're getting about 800 watts total. He's looking for a bit more output and better sound. Well first I was looking at dual 12 setups, and I thought about having 2 SSD's (500 watts each), 2 SE's, or 2 TC-9's. All with 500w each and sealed. A single 12" Q also came to mind. Listens to mostly rap anywhere from 30-75hz. What setup do you think would be best for his power available and more output and SQ?

It is in a ported box. I'm not an SQ-freak, I just want better response from 45-60.