shizzzon

photobucket is screwin with me so go to this link to look at the drawing of it. This is with the driveby adapter attached and a 6ft adapter attached to the driveby stand for proper positioning of the stand- ShiZZZoN's Meca Stand Draft

Well... i was thinkin $10 per legal stand and $6 extra for the driveby adapter. I'll be lookin ar shipping costs if i have to ship these as i'll eat some of the shipping costs so it wouldnt be to much more since some of these pieces may be 36" long.

Thanks.. there will be lots of things i'll be throwing in here and playin around with before i build a baffle to it.. But the first thing that is gonna be done is strengthening the entire car all the way around behind the door jams to the back of the hatch. this will require MANY 2x4s and steel.

What really made it epic is once we GOT to the point of u being able to just take a pic of my car in the lane... Man... u remember how long THAT TOOK.... I thought we was gonna be there forever...

Ouch, your right, The Alpine isn't adjustable..

Hehe, yea that was fun. She is literally the only person that can do that, hehe. I'll be doin a lot of business work and workin on my car too so i got plenty of time to sit back and relax for a while while i get my new setup calculated.

it's the new rave right now for sundown equivalency

I know a very nice amp is the Alpine PDX 1000.1s but be careful if u use this amp... It also does 1000w @4ohm so if you decide to go crazy with the volume control... this amp has plenty of juice to do some damage as i can visually forsee in many people's futures.

That's True! No more "trying"! Do Or Do Not, There Is No Try.

sure thing, hopefully by beginning to mid June, i'll have this "new" electrical system device that will be installed in my ride. I can't say anything about what i'm getting or running... rules are rules..

I uh.... have no bass... On purpose though I tore my wall out now and finished cleanin everything up. I may be posting 1 last reaction vid the day before the wall was tore down if i ever get it sent to me, hehe, not my own vid. The new build will consist of a bunch of ...... Time will tell.

yep

the 1500, 1800 and 3000 are all the same type of board. The 3500 is more expensive but is 18v stable!

Noticed there hasn't been a lot of traffic here lately... Let me get this out of the way before i go on about other news- Everybody who's name is currently in the group buy is LOCKED in! If you think you will not be able to pay, PM me IMMEDIATELY! OK, now onto other news- For those who compete in MECA will like this- I'll be making "special" mic stands soon not seen before for MECA competitors. For those who meter yourself will definitely appreciate these. The stand will be the legal headrest stand but a LOT better than what MECA sells people The stands will be legal headrest stand with an adapter to put on the side of the meter base to accurately place stand 20" from windshield without tape measure. But that's not it.... For those who compete in driveby will love this! Along with this stand, comes an even BIGGER adapter for this stand... A 54" folding arm adapter will mount to the base of this stand and locked into place with plugs to do driveby metering all with the same stand! The driveby adapter will also come with it's own adapter to measure 6 ft from passenger window for proper placing. No tools, no tape measure, no glue, no screws, nothing... And this stand will sell for the cheap At this time, the stands will be available after thr group buy is over but will NOT ship with the meters. Anyone interested, just let me or phi know.

with a 350A alt, a single d3100 should do fine even with both amps. The alt should take care of all or most of the load so you wouldnt need a large reserve.

Oh.. ok, i see what you're saying.

why r u getting a line driver for? I ran 6 amps off the same preout and never used a line driver and did fine.

there is no rule of thumb for spl. IT's all about about how much LENGTH you have available to get the right tuning with what port area u can fit. Do NOT use port calculators when tuning for spl as they will not help. If u can fit 600sqin with the right length then go for it. If the port needs to be longer than physically capable, then u gotta start plugging parts of the port up to decrease port area.

150A for 1500, 100A for 1000

you should fuse to the size of what wire u are using. If the amp has no onboard fusing, then the fuse next to the amp needs to be for the amp, not the wire. So 1000w with no onboard fusing- 100A, 1500w with no onboard fusing- 150A. If they got onboard fusing, using 1/0 needs at least 250A per fuse block.

alt to bat fuse- fuse the wire so a 1/0 cable needs at least a 250a fuse.

when it comes to Knukonceptz, get their wire and that's it, no hard parts.

I Bought These For My Setup , Yet To Be Installed Tho They Seemed Good Whats Bad About Them? for one, the connections are shit. they are a bitch to tighten but then onto performance- they have a VERY HIGH resistance problem. When i was using a HO alt, they would get REAL hot which means resistance issues inside the terminals.

1 amp 1 big 3 addition wire 1 factory wiring (8awg probably) u can get these- Tsunami TSBT-PN (tsbtpn) - Battery Terminals - Sonic Electronix but going with terminals that require terminals on the wire would be cheaper.

tell me all and how many size of wire u need to run to a terminal?