98exploreron22

I have been runing 4-sundown sa-12 in my 98-explorer in a 7.6cf net box with a 110in of port on two AQ-2200 straped at 2 /// I just sold the box and subs to a buddy of mine and am thinking about runing 4-12'' Gcon with the two AQ-2200 in 10.1cf net with 4-6'' areo ports tuned to 32-33hz Are i was thinking of runing 8-10'' Dcon with the two AQ-2200 in 10.1 cf net with 4-6'' areo ports tuned to 32-33hz that would give me 113.04in of areo port with that box. So what i am asking is with the same power for the 4-12'' are the 8-10'' subs.. is cone area king what do yall think will be the best setup in my explorer.. and b4 yall ask yes i have the Electrical to run the amps..two duel Dc power 220amp alts and 6-fullriver 110ah agm batts.. thanks 4any help you can give me on this

Box all in the cargo area. no wall. this explorer has had lots of setups in it and lots of testing when i was looking for numbers with it. the best i have done in this explorer is a 149.6 on the TL on the dash. it has lots and lots of fill and seal and lots of SS damp on the roof floor and doors 3layers min everywhere. i fill and sealed my back door to.... and that 149.6 was a fartbox with 4-12'' DD subs and two AQ3500 at .5 ea tuned to 46hz my explorer.... it helps alot to have your on TL when looking for numbers. i think that setup had a 150//151 in it just got tired of chaceing numbers. i just wont it to sound dam good and get loud now.. i will let the pro chace the numbers.

You might wont to get some batts for your setup. your looking at 2400/2600rms with a stock alt. i think your going to have very bad volt drop without geting some batts to help out..

you can get a new in the box BC3500 for $670.00 thats what i would do thay are dam good amps for the $$$$$$$$$

you are right 300rms ea.....i was thinking thay where 375rms ea...my bad...

8-10'' Dcon would be 3000rms so only maybe 1400 over maybe... just hope that the 8-10'' Dcons like being in a common chamber. i no some subs dont like it....

I hope i am the first to run 8-10'' Dcon. thats onething that made me go with the 8-10'' over the 4-12''subs seams like every explorer i see around where i stay has 2-15'' are 3-12'' are 4-12'' -CVR-are-CVX- subs i just dont wont to be like everyone els thats y i sold the 4-12'' subs and box to my buddy. dont get me wrong thay would get down and get loud and took the power of the two-AQ2200 very well i hope the 8-10'' Dcon will do the same.. and yes i set every amp with my o-scope i dont wont clip city in my setup.

I will send you some pic of the setup when i get done with it. i only have to order the subs going to start the box on wednesday i have the ports allready and the 1.5'' rod for braceing just have to go get the MDF and get the box done. ------ricksi30------ thanks for all your help and time...

I think i am going to try the 8-10'' subs you just dont see 8-10s in the cargo area in a explore every day and i think it will look badass to. i do all my box myself i use the new bassboxpro 6.... i am looking at 11.78 port area per foot with the 4-6'' ports will that be good are do i need more port area

What do you think about the box spec i posted for this setup. i just wont all the info i can get so when the subs get here the box would be done and in the truck ready for the subs.....again thanks for your insite on this

I have personal experience with every line of SSA subs, and tried my best to help you. If you have any other questions I'd be glad to answer them if I can. ----------THANK YOU FOR YOUR INFO------- i was thinking that haveing 8-subs to spred the power would be better than 4 subs and this is the thuck i drive every day i wont loud loud loud with the space i have 2use not numbers who wonts a fart box in there every day driver not me.

I asked here about this setup ///// yall are the ones that have been runing the SSA subs thats y i asked yall.........

So your saying that cone ant king then that the 4-12'' Gcon would sound and do better than 8-10'' Dcon on the same power. thats wha i have been asking------

I come to this form 2 ask about the setup i am thinking of runing 4-12'' Gcon are 8-10'' Dcon subs and have not got any help with what i ask ,,,,,,,,, if this is how the SSA form is when trying 2get help with my setup runing there subs then maybe i need 2re think my sub setup... i am not asking you what you wont me 2run in my setup i ask about 4-12'' Gcon are 8-10'' Dcon on 2-AQ2200. i dont mind finding a sub comp that will help me with this setup. and wonts my business. i would think that SSA would wont my business but if not thats fine thay dont make the only sub out there....

8-10'' Gcon would be over my $1000.00 buget for the subs,,,,,,,,,, thats y i said 4-12'' Gcon Are 8-10'' Dcon subs,,,, its one are the other ,,,,,,, i wonted to tryout the SSA subs but the way its looking on this form maybe i was worng.....

I dont have the room-air space- to run two 18'' subs at the most i have 10.8cf net to work with. i am not doing a wall.. its going in the cargo area of my 98 explorer. my batts are under the explorer where the spare tire was made a batt rack. all 4 amps are under the back seat so i only have somuch room to work with.

Anyone wont to let me no what thay think on this,,,, I am wonting to order the subs by 8-17-12 so any help would be nice guys

I had 24'' rims on my explorer for two days thay rode ruffer than a --BJ-- from a girl with braces,,,,,,,,, I now run 22'' with a 265-tire and the ride is fine just like with my 20''rims

What do the Icon 18'' like for box size and port will be runing a set on a Crescendo bc3500 ---- any help on info thanks

Thanks guys ,, the link was not working lastnite. i am going to try to put a set of Icon 18's in my 98 ford explorer with a bc3500 on them subs up port back if i can make it fit in the back.

Come on guys some help with this would be nice------thanks for any help

WTF happened to ----SHAWN---- leg

17'tall 40'wide 30'deep--------- port at bottom ------- 6'tall 18'wide 22'deep ------------

Anything new with this

It takes power to make power.