Kold_Killa

Yea, it's confusing how you are asking.... Are u getting 2 subs, or just one??? If just one, you want to get a dual 2... If you are getting 2, you want to get dual 1...

The BL will love 1500 watts... Building a ported box isn't any tougher than building a sealed box IMO... Get WinISD and you can enter the volume of the box, then enter the port opening size, and desired tuning and it will tell you how long to make the the port... it's really not that bad...

Since the site is down, can you just give me the mounting depth of the 10" assassin.. and what the sealed/ported enclosure recommendations are. thanks

why do you want to get rid of the rlp??? I wouldn't go smaller than the 3cuft. Mine are in 3cuft each and they are still a bit boomy, I may try a LARGER box, but you won't catch me going any smaller.

Probably the easiest way to get power at 4 ohms is by bridging a 2 channel amp. And yea, what's your budget?

And like I said denim, let me know if I need to help this deal get straightened out straightened out if you know what I mean.

Oh yea, as for power... a Directed 1500d... so about 650 a woofer. I'll get a vid when I can figure out someone that has a cam or something, there is one on my digital camera, but no sound (which doesn't make that much difference) but it is HORRIBLE quality w/ .mov

Well, finally got the two Mach 5 15's in my 98 F150 ext cab today. They are in 6cuft tuned at 30 hz. First off, the woofers are just plain sexy. So simple, not over the top, and solid. After I got them installed I played a few bass test tracks and couldn't believe how clean they were... Now i've never owned a super expensive sq woofer by anymeans, but these compared to my 12 w3s from a little while back blow them away in the sq department. As for the myth of no sq with ported, throw that out the window with this woofer. It is a litte boomy at some notes, but not enough to distract, just enough to notice if you are looking for it. Now, as for being loud.. they can do that to. I was very suprised at how well they hit the higher notes, like 50hz especially since they are ported, but 50hz HURTS. These subs play ever note so clear, i didn't even think that was possible. At 20hz, it doesn't get just real loud, but it surely shakes my truck to death which I guess what 20hz is supposed to do to the ears, right? can't hear it but can't feel that low of a frequency? I'm not getting just stupid flex on my truck any where, but I've always felt the f150's were BUILT FORD TOUGH. I get a little bit of rear window flex, but near non-existent on the roof. This system is definently louder with windows down/doors open, which all of mine have been the same way in the past. Overall, I can say that this is one of the best 214 dollars I have ever spent. Best bang for the buck right now. Working with denim at SSA is a dream. If you are going to get some Mach 5s and you are in the states you have to get hooked up from SSA (i mean, literally because they are the only ones that carry them here ) I am going to build another box when I get a chance and see what happens around 8 - 9 cubes. Why not, I got the space Box pics: http://www.caraudio.com/forum/attachment.p...mp;d=1177454033 http://www.caraudio.com/forum/attachment.p...mp;d=1177636964 http://www.caraudio.com/forum/attachment.p...mp;d=1177636992 Install Pics: http://www.caraudio.com/forum/attachment.p...mp;d=1178242843 http://www.caraudio.com/forum/attachment.p...mp;d=1178242856 http://www.caraudio.com/forum/attachment.p...mp;d=1178242866

Yea, that one is nice... maybe not the red, but would probably look really nice in black and white.

So is the title supposed to be 1 15inch Maw ????

My go http://i23.photobucket.com/albums/b357/Kol...pg?t=1177464260