carguy6702

what do you guys think about these two subs? im looking to get a pair. of either i like both sealed and ported boxes. which is a more all around sub lows and highs. which can give better hitting lows? and can take a beating. i have a saz 1500d that ill be using at 2ohms

Space is limited. I have a reg cab truck subs would go behind seats.

i have a router but dont know how to make the circle cutouts and do curves on wood. can i get some help? thanx

what songs do u recommend listening to with lower hz?

I have a 12 Q D2 w/BP power. and just got a SAZ1500D. how much rms can a stock Q take daily. how about w/BP Power. i know Fi recommends 1000. just think it can take more. just want to see how much it can take to adjust the amp properly.

thanx for the info guys. this weekend I'm going to try something on spare wood.

so a larger ported box is like a sealed box, that they both need less power to push the sub,and pushing it any more will cause damage??

what do you mean by "mechanically depends on box"?

what should the resistance be on the D2 models? i tested mine to day and i got 1.4ohms per vc.?is this right

doesn't have to be just rap could be anything

which would you get?why? RF T10001db or Sundown 1500D for a 12 Fi Q w/BP power

thanx guys

i like both also about the same output at 1ohm and with sundown's sale bout same price also which is cleaner in watts?

I just got a 12 Q D2 with BP power hooked up with a JL 500/1. in a sealed 1.5(20*13*15.5) after sub displacement. is the amp to little for the sub? i set the amp to JL specs. and then i get clipping. i've used the same amp on others subs and get better sound and more power out of it. but with ported boxes using the same JL specs. how should i set it with a sealed box?

ok i got it. so i had it at 1 ohm decided to try 4ohms. then used the dvm and test tone to adjust it, now it dont clip. sounds good. all i need is a new amp to give it 1000rms

I AM A go readjust now with DVM and 50 hz test tones and see what happens

what did you guys you to build your ported box? i mean how did you figure out port length and tuning? what programs did you use or equations.

i have built boxes before,but not from scratch, i've used blue prints from CA.com and others but, i want to build one from scratch, do all the calculations and stuff, just to know how to do it.

great job, like the box, and nice truck

looking for a new sub for now want to a 12. which would you go for? both handle same RMS and bout same price w/options on SSD.

thanx for the input

whats the max box size for the 10? i was thinking 1-1.5@30 is it the same for the 8?

after seeing the vid i dont think its cause the truck is old its def. the sub

being that the BTL is more spl oriented<<--- or does it matter if a sub is spl oriented? how does it handle the lows?