berserker

Okay I see that the rms is 250 watts but has anyone given these a little more juice? I was thinking of trying a single 10 in around a 1 cubic foot enclosure tuned in the low 30s with 300-400 watts. I believe it should just handle that fine, but I am looking for anyone with experience or even any valid opinions. Thanks!

Okay the recommendation for a sealed MAW-15 is 2.2 cubes which from my calculations will result with a Q of 0.548 (roughly) which should yield a tight response. I usually have built enclosures before with a Q of .7 and at the very least built enclosures with Q of around 6. My question is that has anyone tried these with a higher Q than the recommended and what were your results? For example below are some boxes sizes I came up with, no damping fill. Vb of 2.93 cubes = Q of 0.501 Vb of 2.5 cubes = Q of 0.524 Vb of 2.2 cubes = Q of 0.548 Vb of 1.88 cubes = Q of 0.578 Vb of 1.65 cubes = Q of 0.605 Vb of 1.10 cubes = Q of 0.704 Vb of 0.61 cubes = Q of 0.904