00s-dime00

Good shiz John. Congrats.

Hello everyone. I have been a lurker for a while, and decided to present to you my build log...I hope you enjoy The truck The equipment list: For subs, 4 fully loaded 15" FI BTL's For Amplification, I have a RF T8004 And a RF T4001..for now..the other one will be on its way shortly

big change #1 is this...which is not completely done yet...I need to do my graphics next. big change #2 wil happen next month...you'll just have to wait and see.

Like Vic said..it's not that bad at all. The seats are not the stock seats and gave me a whole lot more room. I'm 5-10 and it's pretty comfy...Hell, my buddy who is 6' 4" rode with me up to Southeast Showdown and he wasn't that cramped. And when I start on the reincarnation of the system, I will make sure to post up some pics. It should be a little louder. beat you to it...lol...It's in primer now and it goes into the paint booth on the 24th. It will cost you wayyyyy to much to have me make you one...lol

Aight...so now my 3rd alt goes in...Just an ol' trusty AD244 that was benched at 166 amps of output at full load and 132 at idle to help me out just a little. Since I didn't document the other alt bracket I made...here are some pics of where I started I still have to drill 2 more holes for the idler pulleys but after that, I'm done with the front bracket.

door panel done...for now got it all wired up and I loooooove it...the midbass is outfockin standing...too bad I had to amp it down a lil bit cuz the drivers side couldn't keep up...lol Also made my stainless steel step for the rear roll pan/bumper...

Panel is on the door......still waiting on that damn grille tho

Lol...sorry bro...I can make them a lil smaller if you like... The panel is in primer now...and thats how it will roll to unite...I dont have time to fix it up good enough for paint and theres no use halfassin it Got all the Grilles polished up and put together...minus the mids grille. I am waiting on some epoxy to dry...but check it yo...

Alright...tweet grille is done...with the exception of the SS hardware to hold it together..gotta pick that up tomorrow

Got out there and cut out the tweet holes and started the cover for them...

Not much left to do on this thing...woohoo. Made a grille outta some aluminum and some stainless steel mesh...bolted the mesh to the aluminum with some countersunk allen head bolts...and molded the grille in...now all it needs is a coat of rage to make it pretty and then I can start on the others.

you wont be happy until you wall it off with 4 of them....

Ask and you shall recieve.....courtesy of Joey(418FIs) As you can see, it does move a lot of air...and the enclosure is about 16.5 cubes after displacements... I got out there and did a bunch of sanding on the door panel...got the thing blocked out all the way to 220 grit..I still have a few small things to take care of, but tomorrow I should have the high build primer on it...

Thanks a million Joey...It was great meeting you and Kelly...I tried my damndest to undo that last button there....looks like I need to make it louder for next time ..J/P...Let me know when ya need the welding services...You're not that far from me. All I need is a 220v outlet and I'm good to go

Coast Guard here....Firecontrol and Electronics Tech. Stationed in Jacksonville,Fl for now.

Sweet Joey....Look forward to them

LMK...have welder will travel...you supply the beer

jeezus.....I need to stop by and see this one...I am always down in the Bradenton area. Wouldn't hurt to make a slight detour

I got it coated in resin, and the back side has 2 layers of the 29oz Bi-axial weave mat...along with a coat of Duraglass :ph34r:

Soooooo....things have been crazy AGAIN this week....more B/S like usual....but the good news is that I got out there today and got one door ready for resin.... Check it yo...

Was that back in 06 when I had the 13W7's? I am trying to remember you, but honestly I don't recollect meeting...but then again I have a horrible memory...lol

there is a bunch of extra material on the back of the seats that flaps with the wind..they're old and it came away from the foam..the actual seat is about 1 1/2" away from the sub..will be taken care of when I get them re-upholstered. Here's a few pics to give you an idea of what I have been working on today...I finally got a little motivation Two Dayton RS180-4's per door and one on each side of the dash....along with 4 Morel MDT-39 1 1/8" tweets per side...should be fun... Glassin should start tomorrow

Thank you. I need to get my lazy rear out into the garage and finish everything up..but I've been burned out working on it for the last 6 months...Just enjoying it as it sits for now. Updates will resume in a little while.

No Scrapin' for me this year bro...I would love to go, but that is the week of my honeymoon vacation...And I would no longer have a truck if I missed that trip.. Thanks man. It needs some finishing...but it does the job for now. For those who aren't following my build on the other forums, I met up with Steve Meade when he was in Daytona on Monday and gave him a lil taste of what the redheaded slut is capable of....and he got some video.. Enjoy

So ummmm...yeah Ive been slacking on the updates here...so here is a few pics from before SBN... I got tired of the completely mismatched and fugly interior...so I spruced it up a lil... Doors...for now Dash And I finally got off my ass and installed the 93 Eclipse seats I had lying around..Woohoo Ohhh...and I have a bumper too...