86irocz28

yeah no matter what im keeping them i got a ok deal on them. i got them at 4ohms and about 640w. what would b another good amp 4 them that i could still use when i up grade a lil later and should a try 2 build a seald box or ported 4 them. and at what specs. re doesnt really give u much help with the right power and box size and type 4 them subs. thanks.

what about DB DRIVE PLATINUM SERIES 12? how r those?

they dont sound 2 bad with the box and chit amp but its better then most of the chit around here. i want somethin that will b clearer and has a harder tump 2. im about 2 buld a box this weekend i think im just going 2 do a seald box 4 now.

i really like the re audios that i got but i want more. i want it louder and 2 hit harder. i think i got about 1.75 to 2.00 per sub. i was lookin at the kicker Solo X 12,Solo-Baric L7,Kicker Comp VX 12,Memphis Mojo 12. other re audios. db audio and a few others. im open 2 anything that is going 2 hit hard everyday but also sound good. i also need a new amp. i dont know what 6x9 and 4x7 im going 2 go with yet. i got a 2.4 cap brand new batt and gettin a big alt soon. then i need 2 get some new power wire. what r some good brand wires and what should i stay away from?

im rebuilding my whole setup in my 86 camaro the only thing im keeping is the Kenwood Excelon KDC-X891 deck. what would be 2 good 12's and amp 4 the hatch. i want something that hits very hard but still has great sq right now i got 2 re audio re12's in a bandpass box running off a sony 1000w amp and i want louder. i think about $1000 will be my limit 4 both subs and amp.

what other amps would be good. i really want something new and that i can add a wired gain controller. + i want something that could still b used when i upgrade 2 better subs.

any others the guy at soundwaves said 2 go with a US amps amp but idn. im going 2 change my budget to around $400.

i did but didnt see anything i really liked.

I just sold my kenwood mp5035 and am looking for a new one. i really want one with a tilting motorized faceplate. and that could hook up to my ipod and is HD. i have been looking at the http://www.crutchfield.com/S-kxrBgGfz8lb/c...amp;I=099CD3100 http://www.crutchfield.com/S-kxrBgGfz8lb/c...amp;I=099CD4000 http://www.crutchfield.com/S-kxrBgGfz8lb/c...mp;I=113KDCX891 http://www.crutchfield.com/S-kxrBgGfz8lb/c...amp;I=099CD7000 http://www.crutchfield.com/S-kxrBgGfz8lb/c...amp;I=099CD5100 http://www.crutchfield.com/S-kxrBgGfz8lb/c...mp;I=113KDCX991 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...A:IT&ih=002 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...A:IT&ih=002 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...A:IT&ih=012 i will most likely get it from ebay. i want 2 stay as close 2 $250 as i can. any other good decks out there let me know.

around $250

I got 2 dual 4 re audio re 12s. what are some good amps for them right now i have a Rockford Fosgate 301M and i want a better amp. 900 watts MAX x 1 at 2 ohms 300 watts RMS x 1 at 2 ohms 150 watts RMS x 1 at 4 ohms Selectable 50-250 Hz variable low-pass crossover. 12 dB per octave TRANSana circuit designs keep voltages low and signal paths simple in the pre-amp section, for minimum distortion and maximum power. MESHA provides more efficient transfer of heat from MOSFET output devices to the heatsink for cooler operation TOPAZ--noise killing differential inputs that eliminate 80% of ground loop noise NOMAD--advanced protection circuitry for "intelligent" shutdown protection- speaker-level inputs selectable Punch Bass boost (0/6/12 dB at 45 Hz) frequency response 20-20,000 Hz Item measures 11-1/8"W x 2-3/8"H x 9-7/8"D