jekeke

Hows it look? Not Allowed To Use Image Extention Click here to View Enclosure! http://chronicenclosures.com/subbox.bmp System Build: 2x Incriminator Audio Lethal Injection 12 Inch Woofers Daul 2 Ohm Voice Coils 1x JL Audio 1000/1v2 Slasher Amplifier 1200HC Kinetik Battery Stock Battery 0 Gauge "The Big Three" Capacator 1 Farad Enclosure Specifications: 3/4" MDF Material Height: 25 3/4" Width: 36" Depth: 15" Gross Volume: 6.334 Volume Displacement: Port - 1.396 Cubic Ft Woofers - 0.22 Cubic Ft Bracing - 0.056 Cubic Ft Total = 1.672 Cubic Ft Net Volume: 4.662 Cubic Ft Individual Woofer Volume:Just Under 2.5 Cubic Ft Subwoofers Facing Upwards Port Specifications: Port Area: 74.24" Squared Height: 13.5" Width: 5.5" Port Piece 1: 18" port Piece2: 4.50" Length: 32.1/4" Tuning Freq: 32.07 Hz Volume 1.396 Cubic Ft Ports Facing Upwards Not Allowed To Use Image Extention Click here to View Enclosure! http://chronicenclosures.com/subbox.bmp

Please CLose thread mods, started new thread instead. Thanks!

Subwoofers: Incrimnator Audio Lethal Injection 12 Inches, Two of them. Dual 2 Ohm Voice Coils Amplifier: 1000 Watt JL Audio 1000/1v2 Puts out probably around 1000-1200 wrms at any impedance between 1.5-4 and puts out about 500-600 wrms at any impedance between 1.5-4 1200 Kinetik Battery near amp with Fuse between it and amp. Stock Battery 0 Gauge under the hood Wiring. Enclosure Specs: http://www.incriminatoraudio.com/update/index.php?page=3&cat=2 Older Subwoofer Specs: http://www.incriminatoraudio.com/li.htm Updated mounting depths: http://www.incriminatoraudio.com/update/index.php?page=2&product=2 Rap/Techno 95% of the time, once in a while a rock song will come on. Thats why I was thinkin 33Hz tuning, maybe lower or higher? What do you think. Truck space kind of looks like this http://images.thecarconnection.com/lrg/2009-dodge-ram-1500-2wd-quad-cab-140-5-slt-rear-seats_100257728_l.jpg Except the double back seat is folder up and there is a flat panel folded down for the box to sit on.

I've got some complicated problems. Ok I'll just start with the maximum enclosure Size/Subwoofer Recommendations and we'll go from there. Anything marked with a * is a question/possible problem, please check these spots out. Woofer Recommends This: 2-2.5 Cubic Ft Per Woofer 50" Squared Port Area - 79" Squared Port Area Depending on Box Size. I would like to tune to 33 Hz I think that will sound good?* Enclosure Maximum size and WHY: 36" Exterior Width 30" Exterior Height 14" Exterior Depth Woofer Direction: Subwoofers mounted on top. Port Direction:* There is a door on one end of the enclosure and a seat on the other other end of the enclosure, there is a seat behind the enclosure. The only place the port can possibly fire from is the bottom front of the box. The port must not get in the way of the woofers obviously Make sure you minus .40 Cubic Ft for Bracing/Flush Mount Baffle* (Talk to me where braces go if you are adding a picture) Rounded Port Corners. Let me know what you come up with thanks If its good enough and I end up using it I'll throw you $20 donation! Let me know whats up.

Sorry Port area is 91.05" Squared Also should I remove the brace closest to the port? How far is the opening of the port suppose to be from the wall/any object. Its only 10.25 inchs away from the 45 Degree Brace.

I talked to Nick at Incriminator Audio (Subwoofer Maker) I believe, he said go with 2.5 Cubic Ft per sub and a 70 inchs port in a 6 Cubic ft Box. 2x Incriminator Audio Lethal Injection 12 Inch Subwoofers. I did some further refinements. This is what I came up with Subwoofer Volume - 2.5 Cubic Ft Port Hz - 32 Box Specs: Width - 36" Depth - 26" Height - 14" Net Volume - 6.36 Gross Volume - 5.08 Cubic Ft Volume Per Woofer - 2.54 Cubic Ft Volume Displacement: 0.22 Cubic ft - Woofers .056 Cubic ft - Bracing 4x 45 Degree Corner Braces 1 Cubic ft - Port Volume Port Specs: Port Volume - 1 Cubic ft Port Area - 91.05" Squared Port Diameter - 10.77" Port Width 2" Port Height 12.5" Port Length - 70" Tuned - 31.75Hz