EPerez

I've always thought that going overboard was excessive in most cases when it comes to sub wiring. Huge wires , tiny tensil leads. Yea it's stupid. My friend went to a shop to get speaker wire and they said he needs to use 4 ga to wire up his t1 12 to his amp. I showed him my sub with 10 ga wiring and he was like wtf

Okk first of all that sub doesn't need over 1000 really. If its a dual 2 sa then just wire it to 4 ohms so you don't blow it and then come back here complaining that it blew

4 ga for wiring up the subs is a little excessive. You will be fine with 12ga

Yea but that's usually when your box is shit and makes the system not as loud as it could be so all in all if he has a well built box with it being designed right and with around 2k he should be good.

If he knew what he was doing he would know he would not have to give the subs rather power or even over power them to make them loud.

I use 10 ga with my Zcon so 12 would be fine for you to use as wire from amp to subs. By flex you mean excursion of the sub?

You can't change the final ohm load from 1 to .5 ohm. I'm assuming you have a d2 sub on each amp wire to 1 ohm? If you wire the subs together you can get 2 ohms (if they are d2) and when strapping the amps both being ran at 1 ohm they will accept 2 ohms as the final ohm load.

Thanks. These are the M1s that are rated 5k@12v. The M1s is only 32" long as well. As for the price I would have to disagree about them being expensive. If you look at other comparable amps you will see that pricing is fairly similar if not better with B2. Here is the new store so you can see the prices. Check around and you will see they are quit similar.http://b2audiostore.com/main.sc For example Sundown 3500.1v2 $1125 DD M4 $1400 B2 Zero.1 $999 SAZ NS-1 $1800 DD M4a $1700 B2 m1s $1600 As for the wiring all of this will be covered and never seen. But I still take pride in making it look good. I knew it was going to be covered by the amp rack but still it was really organized! Your right it's not all that expensive compared to other amps similar in power.

Post some pics. You can leave the subs on each amp if you'd like. No really need to make one slave.

That looks very clean man. Nice job!! What do the B2 amps put out? I've seen a few of them but never looked into them. I only heard they were really nice, but expensive. They're huge haha I mean even with all the wires exposed in the pic 3 pics above, it doesn't look messy at all and looks good!

^^Exactly. Adding more power is the worse way to get louder. Build a newer box or try and face the box a different way first.

Not if it's a ssd or q 12 on 1000rms if you already have 1 of the 2 subs. If your picking 1 out of the 3 to buy I'd get the bl since you can alway add more power later on even though you don't need too. What's your goal by the way? That would better help you pick.

Make an offer

Talk to Don at sounddeadenershowdown.com he really knows his shit and would be able to tell you what is the best approach and what you should use. He will make sure you do not buy more that you actually need.

People need to learn that it's not the amp blowing the subs, it's the user. You set the gain and other settings wrong making it hard on the sub eventually leading to a fucked up sub. Learn to set things or have someone set them who knows what their doing.

That's what I was thinking. And demanding too!

Lets hope lol

Same here! I'd be all over it if it were a 12!

That's very true!! Wish I had the space to put one of these bad boys in my trunk!

Hey you have to post a piece of paper with your name, date and ssa

How much port area do you have?? I just built my box for my single Zcon 12 that's 3.4 cubes tuned to 31hz.

Can't wait for my Z v.4! Good to know things are going as scheduled.

Amp sold

First is the Crescendo C1100.4. It was never actually hooked up, because I didn't have my Crescendo Mezzo components yet. It was only installed in my amp rack to fill the hole for it. Comes with the gain remote. Wire was never unwrapped and remote wasn't taken out of package. Looks flawless. Bought it early Jan. but since since it was on back order, I didnt get it till mid Feb. Will be shipped in orginal box. Asking 360+shipping. I think I can transfer the warranty, but not entirely sure. I'll have to ask. Might be kind of hard to see but it says it was tested on 2/12/13. Next is the ledglow.com complete million color underglow and interior. Here is the link to see: http://www.ledunderbody.com/6pc-million-color-led-ledglow-wireless-underbody-lighting-with-interior-kit.aspx ***I bought 2 of these kits. The one in the pics is the first set I bought. Some of the lights for the underglow are out and this is NOT the kit you will receive. The one you WILL receive is the new one I bought. In the new one I never used the underglow and they are still in the package. The 6 interior ones were installed but are fine. ***I took the 2 15" tubes from the first kit and switched them with the second kit(the one you will get). So it includes the regular 4 underglow but 4 15" and 2 9" interior tubes. 2 of the 15" tubes have been extended to make them longer. I just cut the wire and added speaker wire to them to make them be able to reach my trunk. If bought I will need a day to take them out of the car. 120+shipping. If you want anymore pics of either one let me know and I'll get them to you ASAP. Thanks for looking. I also have the PWX 10s in another f/s thread.

Welcome to ssa!