EPerez

Some how the transaction of the card that was declined went through a month later when I ordered 60ft of 2/0 ga from welding supply. I'm just trying to get my money back from this second order and also help some ssa members. I have a 60 ft long piece of 2/0 ga so your big 3 will be cut to the size you need. Just measure each run and I will cut it to that length and add the terminals on the end. The big 3 should be done on any car with a system or a lot of aftermarket accessories. It allows for better current flow and helps voltage drop. If you don't know what the big 3 is it's upgrading the wires from: The positive terminal of the battery to the alternator positive. The negative terminal on the battery to the chassis (frame). The engine block to the chassis.The best way to know how long you need is to get a rope/string and find the best/shortest, then measure it out. Make sure it isn't buy anything that moves or is hot. Also use zip ties to keep it from moving near those things. If you need help figuring out where these things are on your car and which is the best place to do it I can try and help you out as much as I can. I'm asking 50 shipped for each big 3 set.

Okk because I would only plan to add around 1100 rms to them. I can make it as big as 3.2 cubes.

You don't have to worry with Chris (owner). He's the authorized sundown, and others, repair center. He makes sure the shit works. Refurbished ones are as good as new.

What's the biggest the 12s could be in?

Yea db-r has them. I bought my 2500 from there and it works great.

Ask in the for sale section. Just wait for it to be moved.

I'm not really sure what you're saying. The port is going to have 3 common port walls. Look in the help tab on Torres and scroll to the bottom. It says what each thing means.

32-33 would be a good tuning for you then.

Ohh and baffle thickness needs to be .75 or it won't register the extra baffle. To me 37 is way too high. I like 29-33 because of the music I listen too. I listen to rap/hip hop, decaf and dubstep. So it's best for me. What music do you listen too?

Your tuning and volume will still be off if you don't fill in the bottom boxes. It should be around .15 cubes for the sub, 1 for extra baffle, and 3 for the number of common port walls

Check the diehard platinum series. Those are cheaper. If the g34 works then I would get that. If not the next size down. And make sure you do the big 3

That port looks way to small!! Is that what you have now in the bottom pic?

What about height? I'd look at the xs power batts in the ssa store and see which one will fit. Get the biggest that will fit your measurements. If you get confused on which is best, call xs power. They are good at helping decide which battery is best for you.

Not when it's that small of an increase. I wouldn't be goin 4 cubes per 12 but 2 from the 1.6 would be fine and can help give a boost around tuning. Also if you're running less than rated power a bigger box is what you will want. If you need a box design I can help you with it.

Measure the stock battery location to see what will fit first.

Going from 1.6 to 2 cubes isn't that big of a jump for risks or anything like that.

Zcon 15 on a used crescendo bc2k or db-r sundown saz1500. With big box and plenty of port area. That'd be a winner!

Hell yea same here. If the 2 15s don't work. Stick with one or sell them and buy some 12s.

I'm sure that will be okk if those specs are right. Don't know if that's alright to have the separate back part like that. I'm not a professional designer though lol Someone will ok it

That box looks sick as fuckkkk!! Nice job man.

Let me know if you need a design. I can help you out.

Yea just turn it all the way down.

No need for a subsonic filter with a sealed box. I can't remember why but sealed boxes don't use one.

Not sure what you should do there.

Turn it all the way down. I don't know exactly how but the sealed boxes don't need a subsonic filter. I'm sure someone else will explain why.