EPerez

Bump bump

I'm tired of people coming on here not reading the rules and posting dumb preventable shit around here. So annoying. We shouldn't have to ask everything about the product you're selling.

I hate when that happens lol

Thanks! I wish I could use it but I have the Xs instead.

Yea exactly. That is way too long and to not even respond back is pretty bad.

I asked for a design and it took ~30 days for me to decide to get a refund because of how it long it took.

Lol uhh yea I change my mind a lot. I think I like the dual X 12s the best. They get crazy loud, even in the smaller box they're in now! I'm building a different one that's gonna be 6+ cubes

I'm starting my build log for my build that I plan on doing. I will add pics as I go. Leggo! VEHICLE: 2012 Fusion Sport AUDIO EQUIP: Crescendo Mezzo Series 6.5s Crescendo C1100.4 2 12" SSA Zcons 2 Crescendo BC2000s Stock 150a alt Diehard Platinum 31m Stock batt (most likely upgrade) Knu Wiring Stinger Volt Meter Stock Radio and AudioControl LC2i BOX: Subs and port front firing sealed off from trunk. Port in middle tuned to 29hz. Ricksi30 is designing the box for me and Alton is making a 3D model. More info on box will be announced once Rick is done designing. NON AUDIO: Tinted windows 5% all around with 35% whole windshield 12K HIDs from DDM Tuning Red dome lights Million color led interior and underglow from Ledglow.com (4 inside cabin, 2 in trunk and 4 underneathe) Painted black rims and grille Now that you know what i'm doing for my build here are some pics. Car when I first got her Now with 5% all around and entire windshield 35% Making sure the HIDs were right color I realized you had to take the whole front end off to put them in haha 3 Diehard platinum 31m's. I wish they were all mine, but 2 are my dad's. At my dad's house, he had pigs, chickens and goats, so he used 1 in the chicken pen and 1 in the pigs/goats pen. He uses the batteries to power a heater for each pen and has solar panels to charge them back up. I never ran faster to the door when the doorbell rang lol SSA really does pack these things well. Funniest thing ever, I had to wait while the battery charged on the drill, because it was dead. Me and my stepdad have 4 drills with 5 batteries and they were all dead. I had to sit there and stare at the unopened box, waiting for the drill to charge hahah All unboxed Look at that ass A little comparison between SSA Zcon 12 and Skar VVX 15 (if you would like to see more from different views let me know) Zcon 12 is taller than the VVX 15. Which one looks beefier? I can't tell I always let her see my new stuff haha

That's how I do it lol. Been wanting to get a crimper though But it seems to work just as good so why get a crimper? Lol

Thank you! I only use a circular saw and a jig saw. It'd be nice to have a table saw but I do just fine without it lol I was going to get one but I smash the hell out of the terminals with a large metal mallet and it works really good that way too. I can pull on the terminal and they don't move at all.

How do you not know by now that we can't tell you which will be louder in a vs thread.

That's a lot of accessories! I want a grenade launcher on mine haha

I was just going to say a beer box...I forgot that you were underage Haha almost there!

What do you guys use to recone subs? I'm reconing and Xcon 12 and not sure what use to center the coil. I think I saw someone use computer paper before. If so how many sheets of paper?

Yea I'm going to glue the spider landing only then do the surround. Thanks man.

I just saw a video of cardboard from a pack of pop. I think I might try that.

That sounds a little high. Looked up the price of bullets, instantly became jealous. But it makes sense seeing that there is less lead than a 30 cal. I'm getting about $15 for 100 bullets at cheaper than dirt, so there's $.15 per round. Good luck shopping around for this. I've found prices to be pretty fixed. 1000 CCI 400 (small rifle) primers are $40 at cabelas so there's $.04 per round. You can try shopping around, but really at most you'll bring your price per round down a penny if you do so. And most of the common powders used to reload that round are about $25 per pound. It looks like 60 grain bullets are in the middle for .223 bullet weights. Within those it looks like ~23 grains is your average load. There are 7000 grains in a pound of powder so that's 304 bullets per pound or $0.08 per round. So without brass i'm at 28 cents per round. The most you should ever pay for used brass is 10 cents per cartridge. You should be able to reload most cases 5 times or more. So factor that in and your price for brass is really 2 cents per cartridge at most (assuming used brass). Some cases you'll be able to reload 20 times, other's you'll only be able to reload 2. It depends on the loads, your gun, the quality of the brass and how it's handled. Shop around for brass and you can bring that price down. Final cost per round: ~30 cents .223 rounds can be had for 50 cents a piece so you'll be reloading for ` the cost of new rounds. I wasn't lying earlier when I said most of the rounds I make are ` the price of pre-made rounds. As long as you aren't buying super expensive components and spend a few minutes shopping around you should be able to consistently see those savings. This is also assuming you get all this stuff locally and don't have to eat shipping/haz-mat fee's. Cabela's in Dundee is hit n'miss for primers and bullets. I always call them before I go since it's a bit of a trip. They have a horrid powder selection at that store; even when they have everything in stock. Hope that helps. Yea that helps a lot. Thanks. When I got to my dads in Monroe/Maybee. It's 15 mins from cabelas. I'll check there and see what they have.

This is the best way I can explain why. I live in a very very small town. The type of place where if you do something wrong as a child your parents and grandparents know about it before you get home. My family name is a good one and we are known to help out as much as possible. It isn't just a better ploy of doing business. I believe it's a better way to live life and I'm much happier and prouder when I can truly help other people. You can ask anyone that knows me personally that it isn't just a front, it my way of life. That's awesome man. The world NEEDS more people like you. Eventually one day your products will be in my vehicle.

Wow am I impressed. Quentin, your honesty and straight forwardness makes me want to try your product!

I thought I missed the pics too and asked if he got 2 15s to replace lol then I look back and they were there haha

They look sexy!! Have you had a chance to really listen to them yet?

Me? I would only be reloading for my .223 since that's the only gun I'll be shooting really. So with a quick calculation of all the necessary things needed to reload, it comes to ~$.40 per round. Does that sound right? This is not including the press and other things needed to get started.

I am amazed that you can find a range that doesn't sell its brass. They nearly all doYea when I was in Vegas the range sold them but idk if the one here in Kensington does. I'll have to call. What do you mean by shopping right? Like getting different things separately instead of in a bundle?

I think i will definitely shoot more than 500 rounds a years. No matter what I do I am always super determined to make sure I do it exactly right. I'll have to look into doing it then since it does same money. It would be for my AR 15. Thanks man.

Problem is i'm never done with my audio even when i think I will be lol. Problem is i'm never done with my audio even when i think I will be lol.Is reloading that much cheaper to do? But your so right. After you're done, if you're ever done lol, you won't have to spend money to listen to your system. With bullets, for me to go target shooting it's 50 cents a bullet. Ugh I hate that lol