juddspaintballs

this is true. at least the sub showed up

single 12" MTX 8000 in a .75 cube sealed box cheap USED pioneer deck pioneer 6.5" 3 way speakers in all 4 doors (still have them in the rear doors for when i have rear passengers) profile ca1200 or something like that same 96 jimmy

never got mine either, and scott sent an email on the 27th asking if i did so i guess he sent them

what song is that?

mine's doing well with a 6" PVC port

i did fairly well on this portion of my first engineering circuits test 3 years ago. then i fell asleep in class after that section and my circuits grade went to crap. BUT, at least i remembered how to do all this stuff and it's pretty darn simple with subs

cool

so if I understand this correctly, you have one dual 2 ohm sub and you want to add another and you want a final impedance of 2 ohms? if thats the case, one dual 2 ohm sub wired in series gives you 4 ohms. wire that in parallel with another dual 2 ohm sub wired in series and you get a final load of 2 ohms. OR you could wire each sub in parallel and wire them together in series for 2 ohms. either way, it works. here's the wiring diagram:

i tried the same thing, after about 30min to get half a hole done i went to my uncle and borrowed his jigsaw. now i own a jigsaw and a router(havent used it yet, also wish i would have known to get the spiral upcut bit) also get the circle cutting jigs from parts express for the router. they'll make your life so much easier

glad i never liked the crap stuff. my first sub was a 12" MTX 8000 with only 12mm xmax, big whoop. respectable first sub though. now when people are telling me about their cheap systems (had a guy telling me about his explorer with 3 xplod's in a sealed box), i just say "ok, i've heard of those subs before" and make no more comments. if i feel like showing off, i'll make them get in the passenger seat and rock their world before i tell them what i have or "how many" cuz they always ask. just a single 12" Q. sounds like crap outside when cranked (everything rattles on the outside), but its amazing when you sit inside cuz its nice and deadened in there. excursion doesn't make the sub.

took about 12 days from the time of order for it to be built, shipped, and in my vehicle

i emailed scott a couple times before i knew about this forum or before i made my purchase. it usually took a few days, but i got a reply. the one time i got a reply at like 3am (EST) and i replied back and about 5 mins later i had another reply so i replied and again, about 5 mins later i had another reply. we were basically having a conversation over email. and actually thats the night he told me about this forum and the promotion if i posted up all my stuff i think customer service is A++ as well, especially now that i know that i can contact two other people besides scott

so where's the vid of the BL firing in a box at the deli food tearin it up like a newspaper? that would be a real battle of the subs

i hope its an ex cab s10. it'll be awesome and if you do it you should post pictures in the sound and security section of s10forum.com cuz there's alot of guys there that'll be happy for you too

im very excited, i love that you actually took the time and designed a box with a flat curve specific to your vehicle instead of using WinISD and guessing that your box will be good. everything looks awesome. which line of RCA's from Knu are those? i just ordered a set of the 4ch 6m kyrstal kables to replace my klarity kables which are not the best in the world...